« previous next »
Pages: 1   Go Down

Author Topic: Help: I Lost my primer bar return spring  (Read 15792 times)

0 Members and 1 Guest are viewing this topic.

osoosi

  • Active Members
  • ***
  • Posts: 16
    • View Profile
Help: I Lost my primer bar return spring
« on: May 16, 2010, 03:06:01 am »
Anybody have a spare or can tell me where to get a new one; or the specs to order one?

--Craig
Logged

Manuel

  • Active Members
  • ***
  • Posts: 50
    • View Profile
Re: Help: I Lost my primer bar return spring
« Reply #1 on: May 17, 2010, 11:21:41 am »
The wire diameter of my spring is .019" and the size is 3/16 x 2 1/2.  I don't know if this is a common off the shelf size or not (although .020" is common, as is 3/16 diameter). The problem may be finding that size compression spring long enough.  It may take a web search engine for the .020 diameter to come up with the correct length.

Manuel
Logged

MikeA

  • Active Members
  • ***
  • Posts: 53
    • View Profile
Re: Help: I Lost my primer bar return spring
« Reply #2 on: May 17, 2010, 12:32:54 pm »
You might try McMaster-Carr on line, they show a 3/16 x. 02 x 1 3/4".  That was the only
one I looked at so there might be others with a longer length. $6.29 per 12. Try part #
9657K148        Good luck, MikeA.
« Last Edit: May 17, 2010, 12:46:08 pm by MikeA »
Logged

Star73

  • Active Members
  • ***
  • Posts: 220
  • Distinguished Pistol Shot Bullseye Master
    • View Profile
Re: Help: I Lost my primer bar return spring
« Reply #3 on: June 21, 2010, 12:07:42 am »
When reconditionng an old machine I needed sprgs & just took the tired
ones to the local hdw where I found replacements for the one you mention + a couple of others which escape me at the moment.

Ron
Logged
Pages: 1   Go Up
« previous next »