Progressive Stand

[jcullen]

New guy here, Do I need a mount or stand to mount a Progressive or can I mount right on my bench?

[Scott L]

Greetings,
Inline Fabrication has stand solution. If you mount it to your bench you will need a hole for the spent primers to fall through.
Additionally, I deprime on a Lee APP and wet tumble the brass to prevent spent primer dust from wearing out the Star base.

[jcullen]

Thank you, Is your press attached to the stand? or can it just sit on the stand, Thanks

[Scott L]

Yes, it's bolted to the circular plate which is bolted to the 4" Inline Fabrication stand.
It sits on a wood base, so it can be clamped to my reloading bench.

[jcullen]

Thank you

[jcullen]

Is the Inline stand drilled for the primer hole, You've been a help Thank you

[Humbo]

How about mounting holes, are there only 4 mounting holes pre-drilled, if any at all? Instead of having the handle pointing forward or 90 degrees to the side, I prefer to mount my stars with the handle at about a 45 degree angle.

[jcullen]

Is the spent primer hole predrilled

[varmintpopper]

I mounted like this: https://i.imgur.com/yPpInCd.jpg

Good Shooting

Lindy

[Scott L]

Here's how I mounted my Stars on 4" tall Inline Fabrication stands. I have seen a picture of Inline making the same.
If you have a drill press and layout tools it's easy to do. I bought 10" round disc's off Ebay. A 9" disc will work, but you can't drill and tap for the Indexer support screw.

[Scott L]

Dimensional Information.

[jcullen]

Wow great work    Thank you 

[MJCMD1]

I use vintage oak 2 drawer library card catalog drawers. The are sturdy, rock solid and I use the left hand drawer to catch primers and rounds and the right hand drawer for storage.   On E Bay for around $75