« previous next »
Pages: 1   Go Down

Author Topic: Help identifying  (Read 8415 times)

0 Members and 2 Guests are viewing this topic.

junertyl

  • Posts: 2
    • View Profile
Help identifying
« on: January 31, 2020, 03:21:53 pm »
This came in a pile of Star Machine Works progressive press parts.  Does anyone know what this was for?  Thank you in advance for your constructive input.

Link to photo:
https://drive.google.com/file/d/1LRQ_UuSdU18Y9F6VlmfwwIFn-x8vN1EA/view?usp=drivesdk
Logged

fc60

  • Active Members
  • ***
  • Posts: 493
    • View Profile
Re: Help identifying
« Reply #1 on: January 31, 2020, 03:27:14 pm »
Greetings,

Unable to distinguish the size of the tool.

I have similar ones, about 4" long, that have two drive teeth on the end opposite the handle.

The tool is used to unscrew the primer bushing when changing sizes or cleaning.

Cheers,

Dave
Logged

junertyl

  • Posts: 2
    • View Profile
Re: Help identifying
« Reply #2 on: January 31, 2020, 05:05:45 pm »
Logged

Jasper

  • Active Members
  • ***
  • Posts: 8
    • View Profile
Re: Help identifying
« Reply #3 on: February 02, 2020, 05:47:18 pm »
I am not sure want that is. It doesn’t have the drive teeth or dawgs to unscrew the bushings. Hard to tell what it is for. Dave does the tool you were talking about have the teeth or dawgs thread on the tool?
Logged

fc60

  • Active Members
  • ***
  • Posts: 493
    • View Profile
Re: Help identifying
« Reply #4 on: February 02, 2020, 07:03:46 pm »
Greetings,

The standard tool is a piece of round stock with a hole drilled in the center to clear the primer punch. Then, two drive dogs were machined to engage the slots in the primer bushing.

You never did say what diameter your mystery tool is.

Cheers,

Dave
Logged

varmintpopper

  • Active Members
  • ***
  • Posts: 299
    • View Profile
Re: Help identifying
« Reply #5 on: February 09, 2020, 05:42:07 pm »
A Home made to pull the piston from from Star sizer/luber ??

Good shooting

Lindy
Logged
Pages: 1   Go Up
« previous next »