Tony, Thanks for the reply. The casefeeder does seem to work well, it is just a bit different than the Hulme. There are two smaller guide arms that help align the slide mechanism. Instead of a plunger there is a nylon block with a U milled into it to give a very positive positioning of the case. It does work well with the MA case kicker at the final station. When I got this one the internal spring was not in place, so that was a bit of a trick to get that back into position. Thanks for posting the nice pics, your neat setup makes mine look like a bit of a trash pile.
Bob, The 1000 is good, quite pleased with the design and the smoothness of the mechanism. It seems to have little wear in the linkage or slop in the shell plate platform. I saw the one you are referring to. It was missing several critical parts so you may have been better off waiting. (Powder measure, slides, cam mechanism... ) Good luck with the bullet feeder. Let us know how it goes.
