« previous next »
Pages: 1   Go Down

Author Topic: PURCHASED STAR  (Read 12250 times)

0 Members and 2 Guests are viewing this topic.

askimball (Doc)

  • Active Members
  • ***
  • Posts: 471
  • Cell - 318-518-0829 Central Time
    • View Profile
PURCHASED STAR
« on: February 13, 2011, 05:49:31 pm »
On the 25th of last month, I purchased a Universal, lots of extra dies, & Low & Behold I ended up with 4 extra heads...One was a Phelps w/.32 Dies (Black) & Shellplate.... :D ;D
(If anybody interested in the Dies & Shellplate I'll let them go for $200.00).
SOLD
Carrying on > after recent scrutiny, one was drilled out for 7/8" Dies....So much for origional....... ::) :o
With my RCBS, Dillon & Lee dies I'll try and set it up for .44 Magnum, say with RCBS Dies....
I'll probably have to get fc60 to make me a #16 - Shell Expander Plug....What else ??? ???
Any comments PLEASE.. :) 8)
« Last Edit: March 03, 2011, 12:23:54 pm by askimball »
Logged
Doc - I.Y.A.A.Y.A.S.
Retired Police Captain

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1226
    • View Profile
    • Star Machine Works
Re: PURCHASED STAR
« Reply #1 on: February 13, 2011, 06:06:09 pm »
You may need to have the end of the 44 Magnum sizing die turned down so that it will fit the recess in the shell plate. 
Logged
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

askimball (Doc)

  • Active Members
  • ***
  • Posts: 471
  • Cell - 318-518-0829 Central Time
    • View Profile
Re: PURCHASED STAR
« Reply #2 on: February 13, 2011, 06:31:47 pm »
Forgot about the Shellplate, with my limited funds that cost will be difficult... :-[ ??? :'(
MAYBE.. ??? If I can Sell/Swap the .32 Dies & Shellplate I can afford this :-[

.32 Dies & Shell Plate SOLD
« Last Edit: March 05, 2011, 02:44:55 pm by askimball »
Logged
Doc - I.Y.A.A.Y.A.S.
Retired Police Captain

LeupoldMRK4

  • Active Members
  • ***
  • Posts: 99
    • View Profile
Re: PURCHASED STAR
« Reply #3 on: February 16, 2011, 05:05:42 pm »
What calibers do you have available? I am looking for 9mm 45 colt.
Logged

dbltapster

  • Active Members
  • ***
  • Posts: 46
    • View Profile
Re: PURCHASED STAR
« Reply #4 on: March 02, 2011, 09:22:29 am »
Hello!  I'm new here.  I recently purchased a 38 Universal from another memeber (a great guy). -- Anyway, I have experience with Lee dies, and I know thier carbide sizer reaches down lower than the other name brand dies.  I shoot 9mm and 40 S&W, both of which get that "bulge" from being fired from unsupported chambers (Ie. Glocks, etc).  When the die is set just a hair off of the shell plate, it should size your brass down to the webbing. -- And, it would be a fairly cheap venture...amybe 20 dollars.  Would be worth a try!
Logged
Pages: 1   Go Up
« previous next »