1.comes with custom powder bar using inserts for 3.6 BE (installed) and 4.2 BE with the H&G 200 gr SWC lead bullet.
2. Star Lifetyme carbide sizing die with de-capping pin assembly.
3.Star expander plug.
4.Star seater die with roll crimp de-activated.
5.45 taper crimp die in 4th position activated.
6.An excellent clone of the Hulme case feeder with tube holder, cam and top
plate, 38/45,(no tubes but available if needed, most seem to have tubes
already.
7.Large primer magazine, pickup tube and follower rod.
8.#51 primer punch bushing screw driver to change from large to small primers.
10. Powder hopper with new clear plastic tube, and lid,
11.Complete 5 piece safety cam deactivated for 45, use with 32,38,41,44, 45AR
12.Disassembled, cleaned, and lubed ( including parts deep within the #12U floor base.
13.100% complete, nothing more to buy,unless you need tubes, all stations work as intended by Star Machine works.
14.Priced at $950 + shipping & insurance. Postal money order please.
A.R.(Dick) Harris, 515 E-Bullard Ave,#120 Fresno, CA 93710 559-432-2568
ardickharris one at sbcglobal dot net
To send private message go to upper left corner of screen, look for small envelope icon, click this and a screen will open allowing a private message to be sent to the seller.
scroll way down for 10 pictures. arh
