1
Star Reloaders / Re: CMP loader able to use Star Powder Slide?
« on: January 14, 2017, 02:49:35 pm »
Thats great news. I was concerned due to the scrambled drawing I was sent.
News:
Contact is for website or forum technical issues. If you want to communicate with forum members about the contents of their posts or items they are offering for sale, you need to sign up as a member and post a reply in the topic or send them a personal message.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: 1
2
Star Reloaders / Re: CMP loader able to use Star Powder Slide?
« on: January 13, 2017, 08:02:20 pm »
Thank you for posting the drawing. I'm hoping that one can be made for me.
I got a reply from Starmachines.com and the drawing sent to him was badly corrupted. I'm hoping he did get a copy that could be read.
I got a reply from Starmachines.com and the drawing sent to him was badly corrupted. I'm hoping he did get a copy that could be read.
3
Star Reloaders / Re: CMP loader able to use Star Powder Slide?
« on: January 10, 2017, 12:46:29 pm »
Thank you Sir!
4
Star Reloaders / Re: CMP loader able to use Star Powder Slide?
« on: January 09, 2017, 02:41:21 pm »
I'm not a machinist nor do I play one on TV,but I try to makes things the hard way. I made the slide out of a Harbor Freight cutting board. The nylon is self lubricating and moves with little effort. I had to "guess" on the movement of the slide to locate the center of the powder drop hole. I was close to being centered,but no cigar. I added a spring loaded screw to always allow the slide to stay riding tightly on the slide cam bar. As I stated,it works very well but is set for H110 for .357 Magnum.
Here is the powder slide unit
Here is the length if the bronze slide unit
Here is the width of the slide unit channel,it is in fact .75" (3/4")
Here is the length of the slide I MADE. I do not know if this is factory correct, it is what I came up with that works.
Here is the center of the drop hole,it is close but it is not centered perfectly as tghe factory one would be.
Here is the thickness of the slide bar, it is close to being right but is a few thousands "thin" allowing powder grains to collect on the top of the slide bar.
Here is the cam slot. I had to guess to make this work. No idea if I'm even close to factory specs.
Here is the width of the cam at full rest (up)
Here is the thickness of the cam arm
I hope these images help. I can take more if needed and a proper description of the measurements needed are given.
Thanks again for your help.
Here is the powder slide unit
Here is the length if the bronze slide unit
Here is the width of the slide unit channel,it is in fact .75" (3/4")
Here is the length of the slide I MADE. I do not know if this is factory correct, it is what I came up with that works.
Here is the center of the drop hole,it is close but it is not centered perfectly as tghe factory one would be.
Here is the thickness of the slide bar, it is close to being right but is a few thousands "thin" allowing powder grains to collect on the top of the slide bar.
Here is the cam slot. I had to guess to make this work. No idea if I'm even close to factory specs.
Here is the width of the cam at full rest (up)
Here is the thickness of the cam arm
I hope these images help. I can take more if needed and a proper description of the measurements needed are given.
Thanks again for your help.
5
Star Reloaders / Re: CMP loader able to use Star Powder Slide?
« on: January 09, 2017, 01:33:30 pm »
I will do that. Thank you for the offers.
6
Star Reloaders / Re: CMP loader able to use Star Powder Slide?
« on: January 07, 2017, 11:55:58 pm »
Thank you for the reply. My machine came missing the powder slide assembly,just the bronze housing and powder drop tube. I made a slide from a nylon cutting board and drilled a hole to drop one type of powder at a known weight.
I would like to have a slide that could take the bushings being offered.
I was hoping that the Star slide would fit.
I would like to have a slide that could take the bushings being offered.
I was hoping that the Star slide would fit.
7
Star Reloaders / CMP loader able to use Star Powder Slide?
« on: January 06, 2017, 05:39:16 pm »
I have a CMP loader and am wondering if I can use a Star Powder slide with this machine?
Pages: 1