StarReloaders.com Discussion Forum
Star Reloaders Discussion Forums => Star Reloaders => Topic started by: rcflyer on December 12, 2009, 10:49:58 am
-
New member, first post. I have recently acquired a Star reloader and need help with attaching the safety cam. I think the spring may be broken and was wondering if anyone could supply a picture of the spring and how it attaches.
-
I think I found my own answer. Searched safety cam on the forum and found the answer, I think
-
I too had a question on that sprign. It took a bit to find the little hole where it fits into the frame, but once set up it works well.
Did you get yours working?
-
i found the hole but discovered the spring was broken off in it. I drilled the broken piece of spring out of the hole, but the spring was too short to apply enough tension to operate the safety cam correctly. So I screwed a small socket head screw into the hole to act as an extension. I put the spring into the socket in the screw head and now I have an adjustable tension spring and the safety cam works correctly. As the old saying goes, necessity is the mother of invention.
-
As the old saying goes, necessity is the mother of invention.
You got that right! Thanks for that tip.