StarReloaders.com Discussion Forum

Star Reloaders Discussion Forums => Star Reloaders => Topic started by: FOR_Star on January 27, 2022, 04:21:54 pm

Title: Dimensions for M-A Systems Eject-Ease Part
Post by: FOR_Star on January 27, 2022, 04:21:54 pm

Could anyone provide the dimensions for the "Case Retaining Bracket" that is part of the M-A Systems' Eject-Ease case ejector system?
It's basically an "L" bracket that attaches to Star part #79U [Shell Base Locating Strap] using a slightly longer than OEM 8-32 screw.

I'd like to fabricate one to use for on my Universals.

Or, if someone had an actual "spare" one, I would be interested in acquiring it.

Thanks!

Title: Re: Dimensions for M-A Systems Eject-Ease Part
Post by: 824tsv on January 28, 2022, 09:06:56 am

I've taken several pics with a digital caliper. You can email me for the pic's
r bagshaw at cogeco dot ca (no spaces in address)

Title: Re: Dimensions for M-A Systems Eject-Ease Part
Post by: FOR_Star on January 28, 2022, 10:32:18 am

Sent email.  THANKS!!

Title: Re: Dimensions for M-A Systems Eject-Ease Part - CASE RETAINING BRACKET
Post by: FOR_Star on January 31, 2022, 12:06:55 pm

Finished Prototype #1 for the M-A Systems Case Retaining Bracket.  Ugly, but functional.
https://drive.google.com/file/d/12YhsDUpI9egS8-cZsuwJHmToA_R5EsrG/view?usp=sharing (https://drive.google.com/file/d/12YhsDUpI9egS8-cZsuwJHmToA_R5EsrG/view?usp=sharing)
I used aluminum instead of steel, and a #6-32 screw w/washer to hold the wire to the bracket.

Big thanks again to 824TSV (Robert).