StarReloaders.com Discussion Forum

Star Reloaders Discussion Forums => Stars Want to Sell/Want to Buy => Topic started by: NYKenn on November 14, 2013, 10:07:03 pm

Title: Bullet feeder adapter to use Lee feeder on Star
Post by: NYKenn on November 14, 2013, 10:07:03 pm
There is currently a listing on Ebay for the adapter only to use on a Star. It allows the use of the Lee Bullet feeder.
Search Ebay under Star Reloading.  4 available at a start price of $ 100.00

It is not my listing, nor do I know who's it is. Announcing it here only for information for those that may be interested.
Title: Re: Bullet feeder adapter to use Lee feeder on Star
Post by: mdcrace1 on November 14, 2013, 10:29:02 pm
Great post, has anyone on here tried one of the adapters that was mentioned in the above post? It would sure be a cheap way to feed bullets in the Star loader. Thanks to Bruce Williams I am about to get a case feeder setup on both of my Star loaders and a bullet feeder would be great addition as well. Thanks again Bruce great guy to work with. :)
Title: Re: Bullet feeder adapter to use Lee feeder on Star
Post by: joe3320 on November 15, 2013, 09:52:13 pm
Yes sir,

I purchased one last July from eBay and bought the balance of Lee products from  Titan reloading:

http://www.titanreloading.com (Good Service)

To date the 9mm options work well.
The 38 spl. Just so-so.
The 45 acp options have some real kinks in it.

The principal works well but the adapter that holds the bullets needs some rework
to get the correct spacing to enable continuous bullet feeding.

It's worth the price if one has the time to get it set up.
Here are pictures.


Title: Re: Bullet feeder adapter to use Lee feeder on Star
Post by: mdcrace1 on November 17, 2013, 10:54:36 pm
Thank you for you info, I have a .38 and a .45 press and think I will give it a try on both. If you have any pictures of your setups that would be great.
Best regards Mike