StarReloaders.com Discussion Forum

Star Reloaders Discussion Forums => Star Reloaders => Topic started by: 333OKH on August 28, 2013, 01:55:53 pm

Title: Screw size
Post by: 333OKH on August 28, 2013, 01:55:53 pm

What size are the screws that hold the brass primer housing on?.thanks, George.

Title: Re: Screw size
Post by: varmintpopper on August 28, 2013, 03:56:24 pm

George
They are 6X32  filister head  screws with a threaded portion .375 long.
Hope that helps.

Good Shooting

Lindy

Title: Re: Screw size
Post by: rbwillnj on August 28, 2013, 04:12:22 pm

Lindy is correct if you are asking about the screws that hold the primer magazine socket.  

If you are referring to the screws that attach the cast brass (bronze?) primer assembly to the base, the correct screw is a 1/4"-28 x 1/2" socket cap screw.

Title: Re: Screw size
Post by: 333OKH on August 28, 2013, 04:57:57 pm

Thanks Guys, George.