StarReloaders.com Discussion Forum
Star Reloaders Discussion Forums => Star Reloaders => Topic started by: Marty on February 18, 2013, 06:05:13 pm
-
I ended up with a case indexer in a recent purchase and I need to see the extra parts to make it work. I need help to post a picture of it here.
It is black and all cast aluminum with a slide that moves the case into position when operated. No name. But it did come from a Star reloader. It has two feet and is cut out to slide under the primer feed, about 11 inches long and with an arm that sticks up about 9 inches. Marty
-
I think you have a, SHELL PLATE INDEXER, No 100. Ed
-
http://www.sbsdistributing.com/index.php?pr=Star_Press_Accessories
Sounds like you may be describing this one....check it out.
-
Similar in operation except mine bridges the aluminum base plate instead of mounting to it. The case index arm on mine is a short aluminum spring operated one with a cut-out in the end of it for the case. I need to see the type of connection from the indexer to the machine that makes it work. Thank you for the reply. Marty
-
There is an actuator that mounts on one of the links that makes the whole thing work. If you don't have it, I have a couple of new ones. I also have a set of instructions.
-
Kind of sounds like a Brewster indexer or a clone therof. Sorry I dont have a picture, I had one at one time and got rid of it. There may be a pic out there on the web with some searching. Bruce is correct, there is a small block that is clamped onto one of the link arms, the block has a small rod that comes down and actuates the indexer to push the case and shell plate forward. Good luck.
-
To rbwillnj; I tracked down a link and a picture with instructions. I have the brewster indexer. It is complete except for the finger on the link arm. If this is the part you have, how much? Thanks for your information. Marty
There is an actuator that mounts on one of the links that makes the whole thing work. If you don't have it, I have a couple of new ones. I also have a set of instructions.
-
Marty, I sent you a PM
To rbwillnj; I tracked down a link and a picture with instructions. I have the brewster indexer. It is complete except for the finger on the link arm. If this is the part you have, how much? Thanks for your information. Marty
There is an actuator that mounts on one of the links that makes the whole thing work. If you don't have it, I have a couple of new ones. I also have a set of instructions.