StarReloaders.com Discussion Forum

Star Reloaders Discussion Forums => Star Reloaders => Topic started by: askimball (Doc) on December 03, 2011, 11:11:11 pm

Title: #21P SET SCREWS
Post by: askimball (Doc) on December 03, 2011, 11:11:11 pm

Anybody know a source for the  4-36 x 1/8" Set Screw.. ???

Title: Re: #21P SET SCREWS
Post by: angus6 on December 04, 2011, 05:36:00 am

are you sure it's 4x36 ?

Title: Re: #21P SET SCREWS
Post by: cc656d on December 04, 2011, 10:02:24 am

Check with FC 60 as he makes #21

Title: Re: #21P SET SCREWS
Post by: fc60 on December 04, 2011, 10:40:53 am

Greetings All,

The set screws I have encountered with #21C decapping rods for the Lifetyme dies have been #4-40 x 1/8".

I have one Perfection Die, in 45 ACP, and it also is #4-40.

Cheers,

Dave

Title: Re: #21P SET SCREWS
Post by: askimball (Doc) on December 04, 2011, 04:20:00 pm

Fc60
Is it 'NS or NC' ..  ???

Title: Re: #21P SET SCREWS
Post by: cc656d on December 04, 2011, 05:31:45 pm

AT 40 TPI ( threads per inch ) I do not think that it is NC .

Title: Re: #21P SET SCREWS
Post by: fc60 on December 04, 2011, 05:39:23 pm

Greetings All,

The #4-40 is NC

The #4-48 is NF

Cheers,

Dave

Title: Re: #21P SET SCREWS
Post by: angus6 on December 04, 2011, 07:43:44 pm

Quote from: fc60 on December 04, 2011, 10:40:53 am

Greetings All,

The set screws I have encountered with #21C decapping rods for the Lifetyme dies have been #4-40 x 1/8".

I have one Perfection Die, in 45 ACP, and it also is #4-40.

Cheers,

Dave

What I figured , had never seen a #4 with 36 tpi but I haven't seen everything :)

Title: Re: #21P SET SCREWS
Post by: askimball (Doc) on December 04, 2011, 08:20:56 pm

Ok, Mr angus6

I was wrong about the screw being 4-36.... :-[......Though I do have a Tap that is 4-36.... :o

and
Thanks to fc60 I checked my small Tap set and found a 4-40 NC.... :-[

Now we know 'said GI Joe'

Title: Re: #21P SET SCREWS
Post by: angus6 on December 04, 2011, 11:59:52 pm

Doc wasn't kicking ya,,
as I said haven't seen everything and sounds like you have the tap to prove it ;D