StarReloaders.com Discussion Forum
Star Reloaders Discussion Forums => Star Reloaders => Topic started by: askimball (Doc) on October 02, 2011, 08:24:53 pm
-
Below is the Information about the small screw & washer under the Steel Base 8)
Info:
This Screw & Washer is used to Prevent the #24 Primer Punch from dropping below the
#12/12U Steel Floor Base, thus, not letting the Press lock-up..... :o ::) 8)
Specs:
SCREW:
Slotted Fillister = 6-32 x 6/32"
WASHER:
Diameter = .375 OD
Screw Hole = .136"
Thickness = .038 varies