StarReloaders.com Discussion Forum

Star Reloaders Discussion Forums => Star Reloaders => Topic started by: dverna on November 12, 2010, 11:57:06 am

Title: Plug part number 68
Post by: dverna on November 12, 2010, 11:57:06 am

I would like to get one if anyone has a spare.  If not, David has offered to machine one for me if one of you gentlemen could provide the dimensions of same.

It is for a Progessive - NOT a Universal (68-U)

Thanks,

Don

Title: Re: Plug part number 68
Post by: varmintpopper on November 12, 2010, 09:53:05 pm

Don

Are You saying that the plug for the progressive machine is of a different size than the Universal  machine ?
I don't own a progressive, but do have the dimensions for the 68U plug:  0.747 inches wide by 1.057 inches long,
made from round stock.  with a slight radius [no e-mail]@ .005'') on the bottom edge (rounded over) and the top edge left sharp.
The plug could be easily machined from 3/4 inch round stock.
Hope this helped.

Lindy

Title: Re: Plug part number 68
Post by: rbwillnj on November 12, 2010, 10:58:33 pm

The plug for the Progressive is smaller, and I'm not sure they are the same size for all progressives.

Title: Re: Plug part number 68
Post by: 333OKH on November 13, 2010, 01:10:05 am

Bruce is correct, theres more than one size in the Progressive Machines, George.