Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - NYKenn

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 »
1
Stars Want to Sell/Want to Buy / Re: Star univeresal question
« on: September 23, 2021, 09:17:37 am »
You can also look on this site for my listings of past sales, etc. This was Ebay, Gunbroker and other sale sites.

It has not been updated for a few years as sales have been consistent as the prices and have pretty much remained steady. However, I have noted that prices appear to be dropping slightly. I think this is due to aging out of Star owners and a smaller group of newly interested reloaders considering a Star.  I suppose that diminishing participation and interest in Precision Bullseye pistol as a sport is also a contributing factor.   

2
Stars Want to Sell/Want to Buy / Re: WANTED, Need 9mm Luger Shell plate
« on: September 18, 2021, 05:25:50 pm »
Lindy;

Very difficult to find original. Few and far between.

Rich Daniels in CT. can make you one. He is  "Barreltester"  on this forum.

Good luck

Kenn

3
Star Reloaders / Re: Seating SWCs on my Progressive.
« on: May 16, 2021, 02:11:13 pm »
Other than possibly having to adjust your crimp, there should be nothing else you would need to do, except powder measure as you mention
Good luck..

4
Star Reloaders / Re: Thanks for the add
« on: March 22, 2021, 08:01:03 pm »
An option for adjustable bars are bushing bares that Bruce has. Possible Rich Daniels “barrel tester” on this site may have screw adjustable bars.

For the other accessories unfortunately, there is no resource for most of the items, as the sources are mostly out of business or retired. If Bruce does not have, the other options are Ebay, or as posted on the Bullseye Forum.

Fortunately the other items are all “extras” and not required to use the Star to reload.
Good,luck!




5
Loading Data & Reloading Procedures / Powder Bushings
« on: March 22, 2021, 10:34:07 am »
Verify, Verify, Verify!

I have an "00" slide that takes adjustable bushings and a few inserts from Bruce Williams. Checked them prior to loading and they were spot on.

I also have a 1/2 inch bar that came with a number of inserts, (non Bruce Williams). Came with the head for .45LC.  Each marked and in separate small marked bag. Had one marked 6.5 Bullseye. Threw charges of 7.0.
Now have a 6.5 ordered from Bruce.


 


6
I have them both with and without a hole.

Place for debris to go sounds plausible.

7
The internal dimension is associated with fitting over the column.
The overall outer dimension is important to insure the plate seats correctly in the machine base. Obviously if too large and it will not fit and index correctly.  Too small and it will begin to impact shell alignment and location at each station. The locator straps function with a correctly sized shell plate to insure cases are centered at each station of he loading process.

Bruce Williams,   "RBWillNJ"  on this site is the resource for all parts Star.
 

8
Star History / Re: Powder Shut-Off
« on: March 08, 2021, 08:21:09 am »
Posted by EagleMike elsewhere in this forum 11/01/2005.


"I remember several times Elard would grumble about people wanting a powder cut-off. He indicated that he thought it was a bad idea. He wanted to be sure the machine would always throw a charge. He also wanted to be sure the safety cam was installed and working on every machine not using a taper crimp die. A friend of mine - Frank Appel - designed a safety cam that would work with the taper crimp die (at Elard's request), and sold some to Star. I still have a few. This was in the 70's, and CNC was still quite expensive, so only a low quantity was made. I'm not positive the design was ever really fine tuned."



9
Star History / Re: Powder Shut-Off
« on: February 15, 2021, 12:32:09 pm »
Also spelled Ellard.

I noted a related family history associated with a Mary Hambaugh of Colorado where Elard was born.
It notes he was a resident of Sam Diego and earning a living as a machinist.

10
Star History / Re: Powder Shut-Off
« on: February 15, 2021, 12:03:57 pm »
Bruce

Had found a listing of an Elard G. Mock of San Diego, CA, that was born 08/09/1907, and passed away 02/10/1996.

May be a different person, but not sure how many persons were named Elard. It is somewhat unique.
(Have also seen it spelled Elord)

Puts him more into the date range of the patent.




11
Star History / Re: Powder Shut-Off
« on: February 12, 2021, 08:43:13 pm »
Would be interesting to know why the idea did not progress. I expect concern for loaded rounds without powder, by forgetting to turn it on? Others?

In reality, if every head had its own powder reservoir, the need for a shutoff would be almost negated.


12
Star Reloaders / Re: Help
« on: February 12, 2021, 08:02:59 am »
And thanks for the picture suggestion. Seems so simple.

I had tried cutting and cropping and reducing image size with little luck.

Regards!

13
Star Reloaders / Re: Help
« on: February 12, 2021, 07:59:09 am »
Cleaned up the scratch/burr on the shaft with a very fine stone. Applied gun grease to the shaft keyway slot.
Removed keyways from heads and dressed with a fine stone. (one head keyway no pin)
Cleaned and lubricated shaft chamber of each head prior to re-installing keyways. Applied a little (very little) grease with my finger.

Used gun grease not lithium as suggested by Bruce.

Everything worked!

Thanks to all.
   

14
Star History / Bruce Willimans
« on: February 10, 2021, 07:54:48 pm »
Shout out for what a great asset he is to this forum. Not only parts but knowledge.

Had a problem, listed on forum and sent email to Bruce for his thoughts, before sending him machine.

Bruce made a point of responding with an email saying he would call later.
He did call. Machine was operable by that time, but Bruce made some great observations.

Thank You sir!


15
Star Reloaders / Re: Help
« on: February 10, 2021, 07:49:24 pm »
Thanks for the input.
Also spoke to Bruce. He is a big asset to this forum.

Found the following.
One head has a pin holding keyway, 2nd does not.
Found a very slight scratch  (1/8 inch+/-)  on column on edge of groove about halfway down. Barely visible but could easily be felt. Never observed this before.
Took a fine stone and smoothed it. Also reset the keys into the heads. Able to install and appeared to function.

I think (but do not know for sure) that a small piece of debris embedded itself between the head and shaft on the upstroke., causing it to bind,  and lock up. Suppose it could also have been the non-pinned keyway moved?...

Plan on using tomorrow so we shall see.




Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 »