1
Stars Want to Sell/Want to Buy / Re: Star Reloader Value
« on: Today at 08:22:41 am »
Looks like Star Machine Works to me.
Cant read the minor details.
Cant read the minor details.
News:
Thank you for reporting offensive and spam content. Help us keep the forums clean by using the Report to Moderator link at the bottom of the post.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Stars Want to Sell/Want to Buy / Re: Star Reloader Value
« on: Yesterday at 11:02:46 am »
The 2.7gr "00" powder bar is the one of the standard loads of 38 cal, for the148 gr HBWC using Bullseye (BE) powder. The .38 is the most produced caliber for the Star reloader, and by far the most common, followed by the .45acp.
Looks complete and is a Universal in good shape. The dies may have the caliber inscribed on the shoulder.
Prices on Ebay and Gunbroker are all over the place. Try to look for sales prices, not just listing. The Stars have value, but need to find the right buyer.
You can search this site and find info on some past sales, as well as info on the prices in effect when it was acquired to give you some info.
Good luck.
Looks complete and is a Universal in good shape. The dies may have the caliber inscribed on the shoulder.
Prices on Ebay and Gunbroker are all over the place. Try to look for sales prices, not just listing. The Stars have value, but need to find the right buyer.
You can search this site and find info on some past sales, as well as info on the prices in effect when it was acquired to give you some info.
Good luck.
4
Stars Want to Sell/Want to Buy / Re: As a new member can I sell my Star reloading items?
« on: June 15, 2025, 11:05:02 am »
Maybe more detail. Suggest you list the shell plate calibers, and also the maker of the dies. Are they all Star, lifetime, Star thread or have the heads been drilled to 7/14?
Price seems reasonable for the lot.
Price seems reasonable for the lot.
5
Loading Data & Reloading Procedures / Re: Small pistol primer brass 45acp
« on: June 03, 2025, 10:09:42 am »
One thing to look for!
My one piece of SPP .45 was CCI Blaser.
My club collects all the range brass and recycles it for our junior program.
Going through the brass bucket at my club found almost a dozen or so, also CCI Blaser.
No others so far.
My one piece of SPP .45 was CCI Blaser.
My club collects all the range brass and recycles it for our junior program.
Going through the brass bucket at my club found almost a dozen or so, also CCI Blaser.
No others so far.
6
Loading Data & Reloading Procedures / Small pistol primer brass 45acp
« on: May 31, 2025, 08:14:10 pm »
Finally experienced a small primer brass problem. What a PIA!
Locked the machine right up, needing dis-assembly to get it back up and running.
( I purchased new LP slide because one slightly deformed and needed tweaking)bThank you Bruce!
Not sure how I got the sp case as I only try to re-use my fired brass, but…
Does anyone know which manufactures use small pistol?
I am not sorting/checking visually, which adds very little time but is another step.
Anyone have any suggestions for quick identification or separation?
Locked the machine right up, needing dis-assembly to get it back up and running.
( I purchased new LP slide because one slightly deformed and needed tweaking)bThank you Bruce!
Not sure how I got the sp case as I only try to re-use my fired brass, but…
Does anyone know which manufactures use small pistol?
I am not sorting/checking visually, which adds very little time but is another step.
Anyone have any suggestions for quick identification or separation?
7
Star Reloaders / Re: 3D printing
« on: May 31, 2025, 08:06:00 pm »
Maybe a primer follower as well.
8
Star Reloaders / 3D printing
« on: May 31, 2025, 08:04:18 pm »
Picked up a 3D printer. Mainly because New York is starting background checks and may begin registering users. Typical Socialist crap from our useless Democratic/Socialist state government.
Have found many files online for Dillon accessories to make, but zero for Star so far.
Anyone have any or know of some?
Would like a powder measure top to sort powder/bullet when puling.
Possibly other items as well.
Anyone have any or know of a source.
Thanks in advance.
Have found many files online for Dillon accessories to make, but zero for Star so far.
Anyone have any or know of some?
Would like a powder measure top to sort powder/bullet when puling.
Possibly other items as well.
Anyone have any or know of a source.
Thanks in advance.
9
Loading Data & Reloading Procedures / Re: Battle of the bulging brass
« on: April 08, 2025, 08:53:35 am »
I try not to use Glock fired brass, but get some occasionally. To fix this, I use a Lee .003 undersize sizing die in a separate single stage press. I removed the decapping pin. This die works well and has eliminated the "Glock bulge" issues.
I would expect you could get the Lee die machined to Star threads. Would just need to be careful in setup, that it does not encounter the locator tabs.
I would expect you could get the Lee die machined to Star threads. Would just need to be careful in setup, that it does not encounter the locator tabs.
10
Star Reloaders / Re: Star 223 Rem rifle press
« on: March 12, 2025, 08:32:24 am »
Thanks Bruce.
Knew you had the info!
Would like it but it is at a price point, I cannot justify.
Kenn
Knew you had the info!
Would like it but it is at a price point, I cannot justify.
Kenn
11
Star Reloaders / Re: Star 223 Rem rifle press
« on: March 11, 2025, 10:34:39 am »
I believe that Star experimented with .223 presses for possible Military applications with the adoption of the Colt AR in Vietnam. Might be one of the early model prototypes? Not sure how many were actually built, but the number is certainly low.
Mike Dillon noted the lack of production for the .223 and availability resulted in his production of his .223 Superstar platform.
I am sure Bruce can add to the history.
Mike Dillon noted the lack of production for the .223 and availability resulted in his production of his .223 Superstar platform.
I am sure Bruce can add to the history.
12
Star Reloaders / Re: Primer feed question
« on: December 06, 2024, 03:30:00 pm »
Correct Bruce. My confusion on brand.
Thinking of one and wrote the other.
Thanks for the correction.
Kenn
Thinking of one and wrote the other.
Thanks for the correction.
Kenn
13
Star Reloaders / Re: Primer feed question
« on: December 04, 2024, 10:25:09 am »Greetings,
The plastic tubes may have been for the Hulme case feeder.
Cheers,
Dave
[/quote]
Dave
Definitely primer tubes. Were 2 of each.
Kenn
14
Star Reloaders / Re: Primer feed question
« on: December 02, 2024, 10:08:31 am »
Bruce
Green paint on a Star?
Thought that was a Phelps thing.
I helped an acquaintance in the 80s (maybe early 90s) set his up, and when unpacking it, I recall 4 plastic primer tubes in a cardboard tube.
Do not recall if there were Brass as well. Also possible they could have been extras, or from another source?
The machine came from Gil Hebard.
I have a 'bunch' of the plastic which I got from an owner that had them left over after he sold his machine.
Would you like a few?
More than happy to send you some?
Kenn
Green paint on a Star?
Thought that was a Phelps thing.
I helped an acquaintance in the 80s (maybe early 90s) set his up, and when unpacking it, I recall 4 plastic primer tubes in a cardboard tube.
Do not recall if there were Brass as well. Also possible they could have been extras, or from another source?
The machine came from Gil Hebard.
I have a 'bunch' of the plastic which I got from an owner that had them left over after he sold his machine.
Would you like a few?
More than happy to send you some?
Kenn
15
Star Reloaders / Re: Primer feed question
« on: December 01, 2024, 11:19:51 am »
The majority, and all the early models shipped with Brass tubes. Star did ship with some plastic in the early 80s (?).
Unknown if their tubes or made for them. Bruce Williams may know for sure.
Unknown if their tubes or made for them. Bruce Williams may know for sure.