Star Reloaders Discussion Forums > Star Reloaders

Primer feed question

(1/2) > >>

Green Frog:
Just a basic (probably silly) question.  Was the automatic primer feed standard on the Star Progressive?  I’ve never seen one without this feature, so I’m gonna guess “yes” but I have no real means of confirming except for the expert knowledge here.  Sooo, was the automatic primer feed standard equipment?  Also, did they always have brass tubes?

I’m thinking the case feeder was an option since it has a separate name, “Hulme” but I believe I read somewhere that the bases on Star machines came pre-drilled and prepared for them.  Is this correct?

Too much turkey, I guess.  But thanks for the help I know I’ll get!

Froggie

fc60:
Greetings,

The automatic primer feed was original to the machine.

Star did begin to drill and tap the hole for the Hulme Case Feeder. When, I cannot recall.

Cheers,

Dave

NYKenn:
The majority, and all the early models shipped with Brass tubes. Star did ship with some plastic in the early 80s (?).
Unknown if their tubes or made for them. Bruce Williams may know for sure.

rbwillnj:
The Star Progressives/Universals "always" had the primer feed.  It's shown on their patent application.   Below is a picture of Star Progressive #54 (the only one I have ever seen with a "serial" number), and another picture from the review in the May 1934 American Rifleman. 

No54 is even older than the American Rifleman version.   Notice the absence of link stops to prevent over rotation of the crankshaft.

John Hulme made the Hulme case feeders and use to supply a kit to locate, drill and tap the hole for mounting his case feeder.   It was such a popular accessory that Star started to factory drill & tap the base for the Hulme case feeder.   Best I can figure is they started to do that in about 1959.

Bruce Williams

PS   I have never seen plastic primer feed tubes.  Doesn't mean it didn't happen, but I have never seen one.   With a 60+ year production history, two words that should be avoided when discussing Star reloaders are Always and Never.   And I just broke my own rule.

NYKenn:
Bruce
Green paint on a Star?
Thought that was a Phelps thing.

I helped an acquaintance in the 80s (maybe early 90s) set his up, and when unpacking it, I recall 4 plastic primer tubes in a cardboard tube.
Do not recall if there were Brass as well. Also possible they could have been extras, or from another source?
The machine came from Gil Hebard.

I have a 'bunch' of the plastic which I got from an owner that had them left over after he sold his machine.
Would you like a few?
More than happy to send you some?

Kenn
 

Navigation

[0] Message Index

[#] Next page