Author Topic: Plug part number 68  (Read 7439 times)

0 Members and 1 Guest are viewing this topic.

dverna

  • Active Members
  • ***
  • Posts: 14
    • View Profile
Plug part number 68
« on: November 12, 2010, 11:57:06 am »
I would like to get one if anyone has a spare.  If not, David has offered to machine one for me if one of you gentlemen could provide the dimensions of same.

It is for a Progessive - NOT a Universal (68-U)

Thanks,

Don

varmintpopper

  • Active Members
  • ***
  • Posts: 299
    • View Profile
Re: Plug part number 68
« Reply #1 on: November 12, 2010, 09:53:05 pm »
Don

Are You saying that the plug for the progressive machine is of a different size than the Universal  machine ?
I don't own a progressive, but do have the dimensions for the 68U plug:  0.747 inches wide by 1.057 inches long,
made from round stock.  with a slight radius [no e-mail]@ .005'') on the bottom edge (rounded over) and the top edge left sharp.
The plug could be easily machined from 3/4 inch round stock.
Hope this helped.

Lindy

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: Plug part number 68
« Reply #2 on: November 12, 2010, 10:58:33 pm »
The plug for the Progressive is smaller, and I'm not sure they are the same size for all progressives.
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

333OKH

  • Active Members
  • ***
  • Posts: 153
    • View Profile
Re: Plug part number 68
« Reply #3 on: November 13, 2010, 01:10:05 am »
Bruce is correct, theres more than one size in the Progressive Machines, George.
George Tucker
NRA Life Member
USMC Life Member