Author Topic: WTS Star Universal Reloader (44mag) plus second Toolhead (45acp) and Extras  (Read 192 times)

0 Members and 1 Guest are viewing this topic.

Mike_H

  • Posts: 2
    • View Profile
Complete setup for 44 Mag and 45 ACP with taper crimp.  Original owner; the machine has been carefully maintained with no damage or rust.  The bushing setup makes powder changes straightforward.  $1,450 package price includes everything below, with shipping & insurance to the lower 48 states.

1 - Universal Reloader (44mag) with Hulme Case Feeder, Powder Hopper, Primer Tube & Follower

1 - Loaded Toolhead and Shell Plate (45ACP) with Taper Crimp die and Base Plug

8 - Small Primer Pick-up Tubes
12 - Large Primer Pick-up Tubes

3 - 00 Powder Slides (4.0 Bullseye, 7.0 & 7.5 Unique)
3 - Powder Slides drilled for 1/2-inch bushings - one each 00, 5/8, 1/2
6 - 00 Powder Bushings
7 - 5/8 Powder Bushings
13 - 1/2 Powder Bushings

3 - Powder Slide Housing Bases 00, 5/8, 1/2
1 - Powder Slide Housing Cover
1 - Powder Slide Housing Shim set
4 - Powder Measure Spouts

2 - Large Primer Slides
1 - Large Primer Punch
1 - Large Primer Punch Bushing

2 - Small Primer Slides
2 - Small Primer Punches
1 - Small Primer Punch Bushing

2 - Primer Magazine Tubes (Large & Small)
2 - Primer Follower Rods
1 - Primer Punch Bushing Screwdriver
1 - Shell Floor Base Plug (for taper crimp die)
1 - Safety Cam Assembly

bwpsc

  • Active Members
  • ***
  • Posts: 33
    • View Profile
Nice pictures with good description.

Mike_H

  • Posts: 2
    • View Profile
Thank you!