Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Green Frog

Pages: 1 2 3 4 »
1
A dear friend of mine had extensive experience with a very early Star Progressive, loading wadcutter for PPC.  He insisted that it would only work well with a particular kind of primers.
My Progressive dates from the early ‘60s, having been reviewed in the first edition of Handloaders Digest and acquired from John Amber’s estate.  I’m wondering which if any brands of primers I should avoid or particularly seek out so it will “run its smoothest”.
Regards & thanks,
Froggie

2
Star History / Re: Paul "fitz" Jones
« on: June 14, 2022, 03:51:58 pm »
It would appear that Fitz Jones was an entrepreneur, not above a little self promotion (or a lot!)  He seems to have sold a rather extensive line of cheap plastic grips for revolvers and semi-autos.  They were  very popular in about the mid-fifties.  He also sold, during that same time, some higher quality wood grips, at least for revolvers.  I communicated with him briefly around 1996 or '97 when I first got my Star Progressive, but IIRC, I never really was able to get anything much from him but promises, even then he was "out of" whatever it was i needed at the time. 

He was listed on the High Road Forum as being 83 in 2009, so if he is still living would be 100 years old... I doubt he is very actively involved in the industry today.

Froggie

3
Star History / Re: Making H&G molds
« on: January 04, 2022, 05:31:10 pm »
Lindy, it looks like your ten spot mould would empty out that little pot in about two or three pours!   8) Manipulating it during fills and dumps should be great exercise though.  ;)

Froggie

4
Star Lubricator & Resizers / Re: Star sizer w/ Lee TL Bullets
« on: December 19, 2021, 06:19:03 pm »
OK, I didn't make myself clear as I should.  I want a wadcutter bullet with a whole bunch of tiny stripes of some hard lube (like Carnauba Red) in their many grooves designed for liquid lube instead.  What I'm thinking of is to have hard lubed bullets that will behave like the old commercial swaged bullets that have knurled surfaces and some sort of mica and wax coating.  I'm hoping somebody has tried something similar so I'll have a basis for start-up.  FWIW, I'm already planning on heating the hard wax lube... I know that will be a necessity.

5
Star Lubricator & Resizers / Re: Star sizer w/ Lee TL Bullets
« on: December 08, 2021, 10:03:31 pm »
Bueller? Bueller?  Anyone else?

Froggie

6
Star Lubricator & Resizers / Star sizer w/ Lee TL Bullets
« on: November 29, 2021, 11:18:05 am »
I’m wondering whether anyone here has actually tried using a Star sizer (and a die with all lube holes open) to size and lube any of the bullets of the Lee Tumble Lube design?  I’d like to just kiss the perimeter of some Lee 32 gr TLWCs and fill those tiny little grooves. Am I barking at the moon?

Froggie

7
Star Reloaders / Re: New to me 2 star reloaders and sizers
« on: November 29, 2021, 11:11:49 am »
Love the ruby insert… if it doesn’t work up to your expectations, you can always pull it out and give it to your (very skinny) girlfriend.  :D  ;D

Froggie

8
Star Reloaders / Re: Seating SWCs on my Progressive.
« on: May 25, 2021, 01:28:02 pm »
Thanks NYKenn.  This is working up toward the top of my to-do list and should be done within the next month or so.  I'm hoping to set my Star Progressive and Star Lubricator on their own little bench dedicated to loading 38 Spl only, but readily switchable between 38 MRWC and SWC.

Regards,
Froggie

9
Star Reloaders / Seating SWCs on my Progressive.
« on: May 15, 2021, 07:49:03 pm »
Many years ago I bought an old Star Progressive that came from the John Amber estate.  It was/is set up with Hulme case feeder but otherwise out of the box stock, equipped to reload mid range 38 wad cutters for Bullseye competition.    I don’t shoot very many 38s and though we got the press up and running several years ago, it mostly languishes in my basement.  :'(
During one of several abortive attempts to start using it once again, I contacted Bruce and purchased but never installed a seater to seat semi wad cutters rather than the current full wad cutters. My question is (if we ignore powder charge for the moment) do I need to do anything else besides change the seating die to convert from WC to SWC loading?
Sounds stupid I know, but keep in mind I’m barely making the jump from 310 tools to single stage and turret presses.

TIA ~ Froggie

10
Star Reloaders / Re: .223 Super Stars Conversions
« on: December 14, 2020, 07:47:08 pm »
The advertisement states that this is for the "Star Progressive" press.  Was this actually the case or was their design for use on Universal Progressive presses?

Froggie

11
Star Reloaders / Re: New member, with a newly-acquired Star
« on: December 09, 2020, 11:04:37 am »
I just found this topic.  WOW!  If I had a Star Universal in 32 S&W L I’d be burning up the InterWeb to get the rest of the pieces I needed to get it running.  If you’ve been in touch with Bruce, I’m guessing this is a done deal by now.  How about an update?  (maybe some more pictures?  ::) )  This is a pretty hard-to-find caliber for the Stars, at least in this country.

Regards,
Froggie

12
Star Reloaders / Re: Star Adapter
« on: December 09, 2020, 10:56:25 am »
As one of Bruce’s customers for this accessory, I can say without fear of contradiction, it is perfect for its intended purpose.  Even if I weren’t using it with the Lee collimator I’d still want it to hold the case feeder tube in place over my Hulme case feeder base.  The aluminum is adequate and functional I am sure, but the brass one is just so elegant!  Thanks Bruce!

Charlie the Frog

13
Star Reloaders / Re: Star Adapter
« on: December 07, 2020, 05:33:53 pm »
Isn't that one of the ones Bruce made/makes to adapt the Lee Case Collimator to a Hulme Case Feeder?  It looks familiar.

Froggie

14
Stars Want to Sell/Want to Buy / Re: Bullet sizer
« on: August 04, 2020, 11:21:13 am »
Bruce,

Would you happen to have an original 313 die in stock and the punch to go with it?  If yes, please drop me a line here or at my yahoo address if you still have it.  Thanks!

gfrog53

15
Star Reloaders / Re: New Member
« on: August 04, 2020, 11:17:13 am »
You're fulfilling one of my goals.  The Star press in 32 S&W is like a dream for me and has been for a while. I'm wondering though, why did you start with that instead of the 38 or 45?

Froggie

Pages: 1 2 3 4 »