StarReloaders.com Discussion Forum
Star Reloaders Discussion Forums => Star Reloaders => Topic started by: ddeck22 on December 29, 2021, 03:51:21 pm
-
I have searched all over trying to find the answer about what these two parts are. They came in a box with other items for the press (small primer slide, decapping pins, etc) but I can't figure out the two that aren't the Primer Punch Bushing Screwdriver.
The smaller one has a threaded hole in the top, the larger one is solid.
-
They are the parts in a die extractor for a Star sizer.
-
Thank you very much. I thought about the possibility that they were part of the accompanying Luber/Sizer but didn't see any info on that one either.
Very much appreciate your reply.
EDIT: Now I see it : the 5101 die extractor pieces. The bullet remover was threaded in the wrong way.
-
Greetings,
The "tee" handle wrench is to remove the primer bushing when changing from large to small; or, vice versa.
Cheers,
Dave
-
Thanks, someone else on this board had called it the "Primer Punch Bushing Screwdriver" and I found that as #51. The drawing in the picture from the original manual is much different. Luckily, the estate from which I got these had kept all the original documentation and receipts, so I was able to match everything else up (including the extra 6 decapping pins the person bought and never used). I was there for 45 ACP brass when they told me to take these too (Luber/sizer and the press in 45ACP). Based on the documentation, this was bought in 1968 with some very minor usage and then packed away for 50 years.
-
Thank you very much. I thought about the possibility that they were part of the accompanying Luber/Sizer but didn't see any info on that one either.
Very much appreciate your reply.
EDIT: Now I see it : the 5101 die extractor pieces. The bullet remover was threaded in the wrong way.
I am very happy to help!