Star Reloaders Discussion Forums > Star Lubricator & Resizers

Have sizer, don't have experience

(1/2) > >>

johnfreeman:
I have a new-to-me sizer and some lead bullets I just cast in 9mm.

What I don't have is a local mentor to show me how to set up a 'sizer.

Is anyone aware of a good description of how to go from having a new tool with no experience to one that is sizing and lubing bullets?  I'm not (totally) dense but the instructions that come with it that are a bit sketchy.

I also need a punch and die for 9mm RN single lube ring

Thanks!
John

fc60:
Greetings,

First, mount the greaser to a sturdy bench that is comfortable to work from.

Next, determine what kind of lube is in the machine. 50/50 NRA lube is soft and works without heat. Other lubes may require heat so that they will flow through the greaser mechanism. 

Do not force the operating handle. If it does not operate freely, something is not right.

Measure the groove diameter of your 9mm pistol and order a die 0.001' larger.

You might be able to locate genuine parts from Forum members.

Let us know when you are ready for the next lesson.

Cheers,

Dave

rbwillnj:
You are welcome to give me a call, I think you have my number.   I'll send it in a PM just in case you don't.

Bruce

PS, I think I have a die and punch.

varmintpopper:
Try looking on line, there are a lot of "U tube" info That shows You how to setup and use the Star lubrisizer.

Good Shooting

Lindy

Welsh Rifleman:
Go to www magmaengineering dot com which is Magma's website and they have videos on using the Star lubsizer now produced by Magma.

George

Navigation

[0] Message Index

[#] Next page