Star Reloaders Discussion Forums > Star Lubricator & Resizers
newbie, ordered delux lubesizer
(1/1)
gunoil:
Yep, a month ago, i ordered a delux lubesizer, most all accessories, Bout 800$.
Some things i need to make sure i have.
If ya know any more let me know here.
Magma star
catalog
die removal tool
slider & tube (9&45)
5/16 reversible pin vise
15" lube tube
hard blue lube only, no sticky stuff.
post below:
As Lathesmith mentioned the groove in the boolit has to be centered with the lube holes. I pulled the die and inserted a "sized boolit" into the die and pushed it thru until I could feel the groove come into alignment with a "jewelers screwdriver" inserted into the lube hole. I simple inserted the die into the machine and with the [ "ram at its lowest point" ], I adjusted the punch until it touched the bullet base. Guess what?
My thoughts: Max pressure, adjust with the PID control until the nose dots are gone, Let out the push rod a few turns and then adjust the boolit punch the correct height to allow for the "bounce" This should fix you problem.
I found that when I ordered dies from Lathesmith, I ordered top punches with locking nuts. Once adjusted properly, I keep the punches and the dies as a set. Changeover is a snap, no further adjustments required.
rbwillnj:
I'm sure you will be very happy with your Lubesizer. They can be a little tricky to get adjusted just right but once you find the sweet spot (temperature & pressure) you can size a lot of bullets fast.
Down the road you might want to consider the air feed for the lube. I found it to be a great accessory.
I didn't realize that Magma offered the longer lube reservoir. I have heard of Stars with that option, but they are pretty rare.
gunoil:
i have 2 now and real happy, 1 for hi-tek-supercoat & 1 for blue stick regular.
Waiting on parts for right one.
Hope to have nose down mrbulletfeeder.net collator in 4 months.
Hi-tek-supercoat [no e-mail]@ my house. bayoubullets.net ,,, yea jerry miculek's brother donnie. Call him up, & talk to him about coatings and what color ya want.
harleykitplane.com [no e-mail]@.com (my email)
gunoil:
Still stuck on hi tek bullets:
https://www.youtube.com/watch?v=sISgevoaTcUr
https://www.youtube.com/watch?v=sISgevoaTcUr
Iam putting a foot pedal system on my star sizer.
Navigation
[0] Message Index
Go to full version