StarReloaders.com Discussion Forum

Star Reloaders Discussion Forums => Star Lubricator & Resizers => Topic started by: gunoil on May 27, 2013, 04:40:21 pm

Title: newbie, ordered delux lubesizer
Post by: gunoil on May 27, 2013, 04:40:21 pm
Yep, a month ago, i ordered a delux lubesizer, most all accessories, Bout 800$.

Some things i need to make sure i have.

If ya know any more let me know here.
Magma star

catalog
die removal tool
slider & tube (9&45)
5/16 reversible pin vise
15" lube tube
hard blue lube only, no sticky stuff.

post below:

As Lathesmith mentioned the groove in the boolit  has to be centered with the lube holes. I pulled the die and inserted a "sized boolit" into the die and pushed it thru until I could feel the groove come into alignment with a "jewelers screwdriver"  inserted into the lube hole. I simple inserted the die into the machine and with the  [ "ram at its lowest point" ],  I adjusted the punch until it touched the bullet base. Guess what?

My thoughts: Max pressure, adjust with the PID control until the nose dots are gone, Let out the push rod a few turns and then adjust the boolit punch the correct height to allow for the "bounce" This should fix you problem.

I found that when I ordered dies from Lathesmith, I ordered top punches with locking nuts. Once adjusted properly, I keep the punches and the dies as a set. Changeover is a snap, no further adjustments required.
Title: Re: newbie, ordered delux lubesizer
Post by: rbwillnj on June 01, 2013, 05:16:23 pm
I'm sure you will be very happy with your Lubesizer.   They can be a little tricky to get adjusted just right but once you find the sweet spot (temperature & pressure) you can size a lot of bullets fast. 

Down the road you might want to consider the air feed for the lube.  I found it to be a great accessory.

I didn't realize that Magma offered the longer lube reservoir.  I have heard of Stars with that option, but they are pretty rare.

Title: Re: newbie, ordered delux lubesizer
Post by: gunoil on August 06, 2013, 03:15:53 pm
i have 2 now and real happy, 1 for hi-tek-supercoat & 1 for blue stick regular.
(http://i1113.photobucket.com/albums/k511/putt2012/8AAA6EA9-4FC7-4A52-B8AB-6D05693A12DD-242-0000013B182AAADE_zpsfeac75a6.jpg)

Waiting on parts for right one.
(http://i1113.photobucket.com/albums/k511/putt2012/D57AF4B0-BACA-476E-A5E4-14E77F8DA839-169-0000013B72A993B6_zps496c268a.jpg)

Hope to have nose down mrbulletfeeder.net collator in 4 months.

Hi-tek-supercoat [no e-mail]@ my house. bayoubullets.net ,,, yea jerry miculek's brother donnie. Call him up, & talk to him about coatings and what color ya want.
(http://i1113.photobucket.com/albums/k511/putt2012/C124C2CA-2F9A-43DC-9C12-08A904C56307-169-000000D19D2AFC22_zpsfced870f.jpg)




harleykitplane.com                   [no e-mail]@.com   (my email)
Title: Re: newbie, ordered delux lubesizer
Post by: gunoil on September 05, 2013, 12:52:25 pm
Still stuck on hi tek bullets:
https://www.youtube.com/watch?v=sISgevoaTcUr

https://www.youtube.com/watch?v=sISgevoaTcUr

Iam putting a foot pedal system on my star sizer.