Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - tony barone

Pages: « 1 2 3 4 5 6 7 8 9 »
46
Star Reloaders / Re: anyone use a MA Systems Bullet feeder
« on: July 02, 2012, 12:14:21 am »
John I received the Hulme from Star with the machine in 1986. The MA case feeder from what I understand is a very good design as it does not obstruct any stations. Angus that is a tube with a micro switch that controls the collator. The Easy Loader is operated by an air control switch that's mounted to the top of the machine. I think the micro switch tube assembly for the bullets is available from MA Systems. I got one from them about a year ago. I have been buying spare parts from them for a while now but like the Star I have never needed any. You can see the air switch at the top of the machine. You can use the control switch to zoom in. The Easy Loader was designed for the Star and the Dillon 1050. The Kiss bullet collator is available from Kiss Mfg.


47
Star Reloaders / Re: anyone use a MA Systems Bullet feeder
« on: July 01, 2012, 01:09:37 pm »
Angus here is a set up.




48
Star Reloaders / Re: anyone use a MA Systems Bullet feeder
« on: July 01, 2012, 01:08:58 pm »
Angus here is a set up.

49
Star Reloaders / Re: anyone use a MA Systems Bullet feeder
« on: June 29, 2012, 11:57:22 pm »
Angus you also need the bullet tube with micro switch, a bullet collator and an air supply. A friend of mine makes the Kiss Bullet Feeder that works for every press except the Star. Go on You Tube and you can see it in operation. It works great with the 1050 and is about $400.00. He gave me a bullet collator that I use on my Star. The Kiss machine is used by all of the IPSC shooters that I know of and it works superbly. Give MA Systems a call they have parts for that Easy Loader. Thats a good find if you got that at a reasonable price as it was $350.00 new when it was available. I have not made a video yet but I will soon.

50
Star Reloaders / Re: anyone use a MA Systems Bullet feeder
« on: June 28, 2012, 11:09:16 pm »
I have been using the MA System Easy loader for a few years now and it is a joy to operate. It is a trouble free system if set up correctly. I would grab it as I have never seen them offered. They were very expensive from MA Systems.

51
Survey Says... / Re: Dave Wilson (fc60) Master Machinist
« on: June 01, 2012, 01:05:19 pm »
I'm trying to think of something I need from Dave. The dies and seater stems I received from him should have been stamped Perfection.

52
Star Reloaders / Re: PHELPS POSTING AS STAR / PHELPS
« on: May 20, 2012, 04:36:31 pm »
I don't look at E- Bay any longer because of all of the Star- Phelps advertising. Mentioning the Phelps name with Star is blasphemy.

53
Stars Want to Sell/Want to Buy / Re: WTS Star Universal
« on: May 08, 2012, 10:51:02 pm »
That's a little pricey for a machine that's been hanging in the garage. Probably has a little rust on it.

54
Star Reloaders / Re: Would like to see full auto setups with stars
« on: April 22, 2012, 12:46:45 pm »
My guess is the demand slowed due to Dillon's emergence into the market and Stars aging staff also MA Systems products were expensive. The Easy Loader without collator and air supply was $355.00 in 1986.

55
Star Reloaders / Re: Would like to see full auto setups with stars
« on: April 20, 2012, 07:07:09 pm »
MA Systems produced the finest products for the Star to make it fully progressive. I have all of their products and they work flawlessly.


56
Star Reloaders / Re: Lee makes Star dies...Who knew?
« on: March 07, 2012, 01:03:39 pm »
Dave is the man to go to for Star dies as they are flawless.

57
Star Reloaders / Re: NEW PARTS SOURCE FOR STAR MACHINE WORKS
« on: January 29, 2012, 08:13:00 pm »
I can load 1000 rnds. an hour on my Star that's fast enough for me.

58
Star Reloaders / Re: NEW PARTS SOURCE FOR STAR MACHINE WORKS
« on: January 29, 2012, 02:28:21 pm »
Dillon took reloading to another level with the 1050. However MA Systems made the Star load at the same rate as it but the Star lacked the safety features of the 1050.

59
Star Reloaders / Re: Star reloader storage covers
« on: November 28, 2011, 05:55:18 pm »
I have a Star with a case feeder and bullet feeder so it has a big footprint. I went to Jo-Ann fabric and the sewing instructor there made a large cover of my dimensions for me. It is nothing but a large pillow case.

60
Loading Data & Reloading Procedures / Re: SWC overall length
« on: November 27, 2011, 05:48:54 pm »
1.255 was the oal for the H&G# 68 which is similar to the Lyman.

Pages: « 1 2 3 4 5 6 7 8 9 »