Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - tony barone

Pages: 1 2 3 4 5 6 7 8 9 »
Star Reloaders / Re: Glass Powder Hopper
« on: January 11, 2024, 06:06:34 pm »
They looked great on eBay but I am always reluctant to buy anything with a cut off in the powder hopper. I've never had a squib in over 300,000   rounds and find it easy enough to unscrew the power hopper and dump the powder into the proper container.
Tony Barone

Stars Want to Sell/Want to Buy / Re: Wtb moon indexer West Kentucky
« on: January 09, 2024, 02:38:04 pm »
I have loaded over 300,000 rounds with the MA Indexer and have never had an issue same original parts in it. It has to be set up properly same with the Easy Loader the Eject Ease, Case Feeder and Bullet feeder.  MA System was Dope as todays youth would say.

Stars Want to Sell/Want to Buy / Re: Wtb moon indexer West Kentucky
« on: January 03, 2024, 07:32:18 pm »
You should look for a MA System Indexer as it is a much better unit.

I use the .500 powder bar with Hornady Powder bushings #1 thru 20. I pick the bushing that produces the closest charge then chrono to see if i need to ream the bushing for more powder. It's works well and was recommended by Bruce Aryers of MA Systems.

Loading Data & Reloading Procedures / Re: Powder Check
« on: February 07, 2023, 04:31:14 pm »
Have never had a powder drop failure in 285,000 rounds just watch that the powder magazine has powder in it.

Survey Says... / Re: M.A. Systems Bullet feeder
« on: August 02, 2022, 09:06:04 pm »
I have used one for years and would hate to be without it That's why I bought I think all the spare parts that MA Systems had for it. It runs flawlessly. They were very expensive years ago and you also need a bullet collator and an air supply.

Stars Want to Sell/Want to Buy / Re: WANTED, Need 9mm Luger Shell plate
« on: October 02, 2021, 02:50:51 pm »
I have a new 9mm Star shell plate and new Star 9mm 4 die set and I cannot part with them. I was going to shoot 9mm in USPSA but stayed with 38 super comp.

Stars Want to Sell/Want to Buy / Re: Moon Unit
« on: May 04, 2021, 08:44:29 pm »
I have a Moon unit never used.

Star Reloaders / Re: Powder Measure
« on: March 14, 2021, 02:13:06 pm »
I have loaded over 280,000 rounds on my Star and every round has been perfect, can't say that about any other machine. The powder drop and primer operations and many other things are what separates the Star from others.

Star Reloaders / Re: .223 Super Stars Conversions
« on: September 20, 2020, 05:05:21 pm »
Although I only load 38 Supercomp on my Star and it has all MA System attachments also with a Mr Bullet feeder it has loaded 275,000 rounds of perfect ammunition. Never had a squib or a primer problem. One can never say that with a Dillon 1050 or any other machine. I have seen many problem reloads from Dillion machines. I would love to have the new Mark 7 auto loader but would not give up the reliability of the Star. There will always be a place for the Star machine.

Survey Says... / Re: receiving parts from the NEW Star
« on: March 31, 2020, 01:43:14 pm »
Bill was a nice guy but Bruce is unequaled in carrying on the Star. The Star is still a great machine even in todays market. I have loaded 280,000 rounds on my 1986 Star never had a squib or a bad primer seating and never had a bad round. Every round is perfect and never had to case gauge . My Star has all of the MA System attachments and is still fun to operate. Have loaded primarily .38 Supercomp for USPSA.

Star Reloaders / Re: Adapting A Star to Power Drive
« on: July 23, 2019, 04:58:18 pm »
There are some people who have adapted to auto drive using the ammobot drive I think you can view it on you tube. With those systems you give up the fool proof loading of the Star. There will always be issues with those systems that will fail. If you want to auto load I would sell the Star and buy a 1050 and the Mark7 machine. It is also a big learning curve and very expensive.

Stars Want to Sell/Want to Buy / Re: WTS Star Universal in .223 - Sold
« on: February 03, 2019, 04:06:21 pm »
Beautifully finished Bruce does great work.

Stars Want to Sell/Want to Buy / Re: WTB: MA SYSTEMS ROTO-EZE
« on: June 30, 2018, 04:05:40 pm »
I have a spare new indexer but do I want to part with it?. MA System products were the best made.

Stars Want to Sell/Want to Buy / Re: MA System Bullet Feeder
« on: September 18, 2017, 03:27:02 pm »
If all the parts are with it $50.00. and I"ll take it.

Pages: 1 2 3 4 5 6 7 8 9 »