Author Topic: Dimensions for M-A Systems Eject-Ease Part  (Read 2521 times)

0 Members and 1 Guest are viewing this topic.

FOR_Star

  • Active Members
  • ***
  • Posts: 93
  • Star Universal owner since 1979
    • View Profile
Dimensions for M-A Systems Eject-Ease Part
« on: January 27, 2022, 04:21:54 pm »
Could anyone provide the dimensions for the "Case Retaining Bracket" that is part of the M-A Systems' Eject-Ease case ejector system?
It's basically an "L" bracket that attaches to Star part #79U [Shell Base Locating Strap] using a slightly longer than OEM 8-32 screw.

I'd like to fabricate one to use for on my Universals.

Or, if someone had an actual "spare" one, I would be interested in acquiring it.

Thanks!
Warren
Fair Oaks Ranch, Texas
Star owner since 1979

824tsv

  • Active Members
  • ***
  • Posts: 37
    • View Profile
Re: Dimensions for M-A Systems Eject-Ease Part
« Reply #1 on: January 28, 2022, 09:06:56 am »
I've taken several pics with a digital caliper. You can email me for the pic's
r bagshaw at cogeco dot ca (no spaces in address)

FOR_Star

  • Active Members
  • ***
  • Posts: 93
  • Star Universal owner since 1979
    • View Profile
Re: Dimensions for M-A Systems Eject-Ease Part
« Reply #2 on: January 28, 2022, 10:32:18 am »
Sent email.  THANKS!!
Warren
Fair Oaks Ranch, Texas
Star owner since 1979

FOR_Star

  • Active Members
  • ***
  • Posts: 93
  • Star Universal owner since 1979
    • View Profile
Re: Dimensions for M-A Systems Eject-Ease Part - CASE RETAINING BRACKET
« Reply #3 on: January 31, 2022, 12:06:55 pm »
Finished Prototype #1 for the M-A Systems Case Retaining Bracket.  Ugly, but functional.
https://drive.google.com/file/d/12YhsDUpI9egS8-cZsuwJHmToA_R5EsrG/view?usp=sharing
I used aluminum instead of steel, and a #6-32 screw w/washer to hold the wire to the bracket.

Big thanks again to 824TSV (Robert).
Warren
Fair Oaks Ranch, Texas
Star owner since 1979