Star Reloaders Discussion Forums > Star Reloaders

Dimensions for M-A Systems Eject-Ease Part

(1/1)

FOR_Star:
Could anyone provide the dimensions for the "Case Retaining Bracket" that is part of the M-A Systems' Eject-Ease case ejector system?
It's basically an "L" bracket that attaches to Star part #79U [Shell Base Locating Strap] using a slightly longer than OEM 8-32 screw.

I'd like to fabricate one to use for on my Universals.

Or, if someone had an actual "spare" one, I would be interested in acquiring it.

Thanks!

824tsv:
I've taken several pics with a digital caliper. You can email me for the pic's
r bagshaw at cogeco dot ca (no spaces in address)

FOR_Star:
Sent email.  THANKS!!

FOR_Star:
Finished Prototype #1 for the M-A Systems Case Retaining Bracket.  Ugly, but functional.
https://drive.google.com/file/d/12YhsDUpI9egS8-cZsuwJHmToA_R5EsrG/view?usp=sharing
I used aluminum instead of steel, and a #6-32 screw w/washer to hold the wire to the bracket.

Big thanks again to 824TSV (Robert).

Navigation

[0] Message Index