1
Stars Want to Sell/Want to Buy / Re: Sold Pending Funds: Star Universal in .38
« on: January 24, 2015, 07:23:21 pm »
This unit is now SOLD and shipped - Thanks for all the interest 
Best regards, Daniel
Best regards, Daniel
News:
Your active membership and involvement is what makes this forum work. Thank you very much!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Stars Want to Sell/Want to Buy / Re: Rebuilt Powder Magazines
« on: January 22, 2015, 05:32:52 am »
Thank you Sir!
3
Stars Want to Sell/Want to Buy / Re: Rebuilt Powder Magazines
« on: January 21, 2015, 10:42:19 pm »
Bruce,
PM sent - LMK please...
Thanks! Best regards, Daniel
PM sent - LMK please...
Thanks! Best regards, Daniel
4
Stars Want to Sell/Want to Buy / Beautiful Star Universal in .38
« on: January 04, 2015, 12:13:11 am »
Gentlemen, just to clarify a few things - Dad was a gunsmith at the prominent bullseye shop in this region and when something came in that was too good to be true, he generally had first or second call on it for himself. So when this one came in the store, he tried to keep a poker face and put it aside for himself. The original plan was to make some regular income with it but soon afterwards he had a falling out with those particular people (caught them selling their crappy reloads in his labeled boxes). In the meantime, his skeet reloads were always in constant demand. He supplied 3 different skeet clubs down here with reloads on a regular basis and the MECs just kept getting all the attention and the Star just sat there untouched - eventually for decades. Now he is gone and I'm getting so old I have little time to spend at the range and do not need this sitting around for 20 more years. This machine has never had a whole case of bullets loaded on it... Pictures cannot do it justice. All the key wear points are just like they looked when Dad first got it - unused, original, and beautiful.
The Hulme case feeder is the same way - looks never used, and I'm including 3 shell tubes (one aluminum and 2 phenolic)with it which will do almost any caliber. The Brewster indexer is the only thing in the lot that actually looks like it's seen some action. Dad never used it on the .38s but someone has at some point - and it is still in better shape that most any that you ever run across - springs and push actuator in good shape, finish in good to excellent shape, and still has the factory actuator piece which cycles it.
So this is one of those machines you always wished you could come across for a lifetime of service for you and your childrens' children... And I've included the case feeder and indexer which seem to be two of the first things everyone wants to go out and add on for sheer convenience and overall productivity. And included the extra primer pickup tubes so you can flat run 300 rounds without doing anything but swapping in a new tube of shells and primers and keep on going some more.
My thinking here is $750 for the loader
$100 for the Hulme feeder and tubes
$100 for the Brewster Indexer, and other extras listed below
_________________________________
$950 total for all major components
Includes 3 small primer pickup tubes and the extra charge bar (make your own collet/bushing setup for one of the bars), and the fullsize taper crimp die and second seating stem, if you would like to load the larger SWC or a jacketed round of some type - I'm just including all that to make a nice package for someone to enjoy and have a great start rather than the bare minimum....
I would like to think that some of this pretty well speaks for itself
As always, please PM me with any questions or send me your email for better resolution pics.
Someone has got to want a first class machine like this for their bench, either as a first machine, or an addition to the stable.
LMK... Best regards, Daniel
The Hulme case feeder is the same way - looks never used, and I'm including 3 shell tubes (one aluminum and 2 phenolic)with it which will do almost any caliber. The Brewster indexer is the only thing in the lot that actually looks like it's seen some action. Dad never used it on the .38s but someone has at some point - and it is still in better shape that most any that you ever run across - springs and push actuator in good shape, finish in good to excellent shape, and still has the factory actuator piece which cycles it.
So this is one of those machines you always wished you could come across for a lifetime of service for you and your childrens' children... And I've included the case feeder and indexer which seem to be two of the first things everyone wants to go out and add on for sheer convenience and overall productivity. And included the extra primer pickup tubes so you can flat run 300 rounds without doing anything but swapping in a new tube of shells and primers and keep on going some more.
My thinking here is $750 for the loader
$100 for the Hulme feeder and tubes
$100 for the Brewster Indexer, and other extras listed below
_________________________________
$950 total for all major components
Includes 3 small primer pickup tubes and the extra charge bar (make your own collet/bushing setup for one of the bars), and the fullsize taper crimp die and second seating stem, if you would like to load the larger SWC or a jacketed round of some type - I'm just including all that to make a nice package for someone to enjoy and have a great start rather than the bare minimum....
I would like to think that some of this pretty well speaks for itself
As always, please PM me with any questions or send me your email for better resolution pics.
Someone has got to want a first class machine like this for their bench, either as a first machine, or an addition to the stable.
LMK... Best regards, Daniel
5
Stars Want to Sell/Want to Buy / SOLD and Shipped: Star Universal in .38
« on: December 06, 2014, 01:53:27 pm »
This machine is sold and shipped. Thanks for all your interest.
Beautiful Star Universal in .38 special, barely used by my Father - Complete and including 3 primer pickup tubes, Hulme case feeder with 3 tubes, and Brewster indexer. Also includes a 2nd powder bar (3.5 BE), a new style taper crimp die, and a 2nd seating stem for 158gn SWC which didn't make it into the pics. Selling for $950 + shipping from 32068.
I left the platform Dad put together for this attached when I took the pics, because I intend to post this locally in a few days... But would not necessarily recommend the increased shipping cost to send this unless you really have a use for it.
Please PM me with any questions or send me your email for better resolution pics. Thanks, Daniel
Beautiful Star Universal in .38 special, barely used by my Father - Complete and including 3 primer pickup tubes, Hulme case feeder with 3 tubes, and Brewster indexer. Also includes a 2nd powder bar (3.5 BE), a new style taper crimp die, and a 2nd seating stem for 158gn SWC which didn't make it into the pics. Selling for $950 + shipping from 32068.
I left the platform Dad put together for this attached when I took the pics, because I intend to post this locally in a few days... But would not necessarily recommend the increased shipping cost to send this unless you really have a use for it.
Please PM me with any questions or send me your email for better resolution pics. Thanks, Daniel
6
Stars Want to Sell/Want to Buy / Re: Sold Pending Funds - Phelps Reloader - Star Copy
« on: October 24, 2014, 10:23:19 pm »
Sold pending funds. Thanks, Daniel
7
Stars Want to Sell/Want to Buy / Re: For Sale - Phelps Reloader - Star Copy
« on: October 24, 2014, 08:31:32 am »
PM'd you as well this morning... Thanks, Daniel
8
Stars Want to Sell/Want to Buy / Re: For Sale - Phelps Reloader - Star Copy
« on: October 23, 2014, 08:15:08 pm »
Still available - Emailed reply w/zip etc. Thanks, Daniel
9
Stars Want to Sell/Want to Buy / Re: For Sale - Phelps Reloader - Star Copy
« on: September 06, 2014, 03:50:49 am »
Reduced to $400.... Thanks, Daniel.
10
Stars Want to Sell/Want to Buy / Sold and Shipped - Phelps Reloader - Star Copy
« on: August 30, 2014, 07:58:47 pm »
Gentlemen, up for sale is what I am told is a Phelps Deluxe reloader. As you can see below it is a copy of the Star Universal.
It is a used machine, not rebuilt, so finishes are original, and appears to be in good working order. I have included a Star powder magazine, a Star primer mag, and small primer pickup tube to complete the setup - which is in .38 special.
Have seen these on 'the bay' for up to $750, but wanted to offer this here on the forum before going down that road.
Thought someone who regularly loads multiple calibers (and tired of changing tool-heads and primer assemblies) might well have good use for this. Selling for $400 + shipping and ppal. Please PM me with any questions or send your email and I can provide some better resolution pics. Thanks all. Best regards, Daniel
It is a used machine, not rebuilt, so finishes are original, and appears to be in good working order. I have included a Star powder magazine, a Star primer mag, and small primer pickup tube to complete the setup - which is in .38 special.
Have seen these on 'the bay' for up to $750, but wanted to offer this here on the forum before going down that road.
Thought someone who regularly loads multiple calibers (and tired of changing tool-heads and primer assemblies) might well have good use for this. Selling for $400 + shipping and ppal. Please PM me with any questions or send your email and I can provide some better resolution pics. Thanks all. Best regards, Daniel
11
Stars Want to Sell/Want to Buy / Re: SOLD! New .44Mag Toolhead
« on: June 14, 2014, 12:08:03 am »
This item is sold gentlemen. Thanks for your interest.
12
Stars Want to Sell/Want to Buy / Re: F/S New .44Mag Toolhead - Reduced
« on: June 11, 2014, 08:07:47 pm »
"cc656d" - I tried to respond but your inbox in full... Let me know when you free up some room.
Best regards, Daniel.
Best regards, Daniel.
13
Stars Want to Sell/Want to Buy / Re: F/S New .44Mag Toolhead - Reduced
« on: June 10, 2014, 05:08:00 pm »
Gentlemen, reduced the price above down to $500. That previous '6' should have always been a '5'...
My apologies. Best, Daniel.
My apologies. Best, Daniel.
14
Stars Want to Sell/Want to Buy / Re: F/S New .44Mag Toolhead
« on: June 07, 2014, 09:24:58 pm »
Thanks so much TNRELOADER. And my Best Regards!
15
Stars Want to Sell/Want to Buy / SOLD! New .44Mag Toolhead
« on: June 07, 2014, 08:02:20 pm »
Sold - New toolhead in .44 Mag with new shellplate and 1/2" powder drop.
These all appear to be new, never seen a machine. Includes new 11gn/231 powder bar.
$500 + paypal fees and shipping from 32068. If you need one, add a complete larger primer
setup, mag tube, pickup tube, primer slide/punch/nut, and wrench for add'l $50.
Please PM me for any questions/details. Thanks for looking, Daniel.
These all appear to be new, never seen a machine. Includes new 11gn/231 powder bar.
$500 + paypal fees and shipping from 32068. If you need one, add a complete larger primer
setup, mag tube, pickup tube, primer slide/punch/nut, and wrench for add'l $50.
Please PM me for any questions/details. Thanks for looking, Daniel.