Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bigdaddy

Pages: 1
1
how all your star folks doing?????

2
Star Lubricator & Resizers / Re: *** HELP *** IS THIS A STAR LUBE SIZER
« on: February 09, 2013, 03:28:52 pm »
When I first got this press I quickly checked the parts with a magnet. The magnet stuck to everything but the lube tube cap.
Witch I figured out was brass or bronze. The lube tube itself just didn't have the right color to be steel but the magnet stuck to it.
So I assumed it was steel. This morning I got my magnet out again & did some checking on the lube tube again. Turns out the lube tube is not steel it is brass or maybe copper. The magnet was attracted to what ever is inside the lube tube. Maybe this will help someone figure out who made this press.

3
Star Lubricator & Resizers / Re: *** HELP *** IS THIS A STAR LUBE SIZER
« on: February 08, 2013, 06:31:46 pm »
I posted this on castbullits also. Someone on that forum said he thinks it might have been made by a company called "Meepos"
I had never heard of that company...So I'm going to start researching Meepos & see what I can find...

4
Star Lubricator & Resizers / Re: *** HELP *** IS THIS A STAR LUBE SIZER
« on: February 08, 2013, 05:46:49 pm »
dbltapster
Thank Your for the help...

5
Star Lubricator & Resizers / *** HELP *** IS THIS A STAR LUBE SIZER
« on: February 08, 2013, 07:41:05 am »
I recently found this vintage bullet sizer/lube press at an estate sale.
I can not find a company name or marking of any kind to identify or date this vintage reloading tool.
The body is all cast iron , with machined steel parts , the lube tube cap is cast brass or bronze
The lube tube looks brass but a magnet sticks to it ?

This press looks to be in good operating condition with no broken or missing parts
The die in it is not marked , I believe it is a .38 cal die

Here are some photos  I look forward to hearing your opinion on this vintage reloading tool










6
SOLD ON EBAY..... Got what I wanted for it....

7
LeupoldMRK4
 I really value your opinion & knowledge about these machines & I thank you for helping me.
 I'm just trying to get to the bottom of this.

I found the thread "Old Star Lubrisizer" . That one has the BRONZE Fulcrum Bracket , & the curved Fulcrum Lever...
But it has a PATENT NUMBER on a small base & no Brass tag....
I have seen the brass tag on a old star press ,But I haven't seen one on a Lubrisizer

What I haven't seen is the LARGE rectangle shaped base with PAT PEND & BRASS TAG

I'm not trying to be a hard nose about this ... I'm just going by what Bill , The old star employee told me...
He said he thinks this is the prototype  that was on display in the office at star in the 1950's.





8
LeupoldMRK4
The cast iron parts I have seen...
What is your explanation of the BRONZE Fulcrum Lever Bracket & the Curved Fulcrum Lever & the LARGE sand cast base?
Have you seen these before???

Fc60
the former employee was a member on this forum... But he got tired of the BS
He is retired & makes parts for the lube/sizer ,He contacted me throught eBay & told me what he thought this was.....

I'll check with him & see if he wants to answer questions....

9
I have an old Star lube/sizer ,it has some parts that I cant find on other star lube/sizers I have found on this site & the interweb.
I want your opinion on what I have.....This is for sale & I want to know exactly what it is so I can describe it correctly...

These are the parts that are different than others I have seen

Brass Tag riveted on the base that says "STAR MACHINE WORKS SAN DIEGO CALIF"
PAT PEND cast into to LARGE rectangular sand cast base ,
CAST IRON Lube tube cap
CAST IRON Crank Shaft Bearing Bracket
CAST IRON Bullet Punch Ram
BRONZE Fulcrum Lever Bracket
Curved Fulcrum Lever going to the lube pump plunger

I have talked to a guy that worked for STAR in the 1950's ,He siad this is the prototype that STAR used to get the patent for the lube/sizer back in 1934 / 1935. He said this is the one that was on display in the office for many years at STAR MACHINE WORKS...BUT others have contacted me & disagree that this is or might be the PROTOTYPE..
Look at these photos & PLEASE post your opinion....

This was found stored in a old building on the corner of 10th Ave & Broadway in San Diego.
Less than 6 blocks north of the old STAR MACHINE WORKS location at 418 10th Ave San Diego Calif.















11
Well folks thanks for all the great info & OPINIONS
In the last week I have received emails confirming what this is from people that worked at STAR MACHINE WORKS in the 1950's
This a POSSIBLE PROTOTYPE that was use to get the patent by STAR MACHINE WORKS,
One forum member think this is the unit that was displayed in the office at STAR MACHINE WORKS
 
STAR MACHINE WORKS LUBE/SIZER  , "POSSIBLE PROTOTYPE"
Brass Tag  riveted on the base that says "STAR MACHINE WORKS SAN DIEGO CALIF"
PAT PEND cast into to LARGE rectangular sand cast base ,
CAST IRON Lube tube cap
CAST IRON Crank Shaft Bearing Bracket
CAST IRON Bullet Punch Ram
BRASS or BRONZE Fulcrum Lever Bracket
Curved Fulcrum Lever going to the lube pump plunger

This was found stored in a old building on the corner of 10th Ave & Broadway in San Diego.
Less than 6 blocks north of the old STAR MACHINE WORKS location at 418 10th Ave San Diego Calif.

If you have a serious offer please contact me at 619-994-8187

Take a look at the photos & one video below & feel free to ask me questions

If you feel more secure dealng on ebay
I will relist this on ebay with a Crazy High asking price
I really don't expect to get that price, You can make me an offer there























VIDEO ( click on the photo below to watch the video)

Pages: 1