Author Topic: info on boss made in san diego reloading press  (Read 14427 times)

0 Members and 4 Guests are viewing this topic.

jasta

  • Active Members
  • ***
  • Posts: 7
    • View Profile
info on boss made in san diego reloading press
« on: October 07, 2007, 07:58:43 pm »
i have some parts for a press that was made here in town. on the frame it is marked [boss] [san diego] [pat. no.] at the top of the frame there are from left to right three holes 1st.hole 7/8"x14tpi 2nd.hole aprox.5/8" and 3rd. hole  7/8"x14tpi  [i beleve 1st. hole sizer die 2nd. hole powder measure 3rd. hole seating die] now the ram housing assy. is pivoted so the ram can and will aline to the die. all i have is the frame and the ram housing .the parts that fit and work in the ram are the same parts that work in the old cast iron pacific [C] press.

sorry no photo. one of guys i showed it to was telling me he thinks he saw a photo of one in an  old  Hensley ad. he also was saying something about in the same ad there was a powder  measure that they made.

so if someone can shead some light on this one? thanks