Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - TDO'NEILL

Pages: 1 2 3 »
How is the sizing problem? I had another idea, can you get a hold of a 9mm that has already been sized? Try it in your press to see if that works smoothly. Maybe there is a die problem. Let us know.

Star Reloaders / Re: Needed: A Photo of Hulme Case Feeder
« on: December 23, 2008, 06:16:11 pm »
Thanks for keeping me in mind. Right now I am looking for acceptable bowls. Check back from time to time.
I may have a case feeder available I'd have to look.
Thanks again,

Star Reloaders / Re: Star progressive presses?
« on: January 11, 2008, 06:34:55 pm »
The Star Loaders were all made by a highly skilled craftsman. They are a first class press.

Star Reloaders / Re: Freeloader
« on: November 25, 2006, 07:10:12 am »
fish cop

I am making a EZ loader for the Case feeder if you need more information my email is tomoneill [no e-mail]

Star History / Re: New member
« on: August 01, 2006, 06:40:02 pm »

If you are looking for a case feeder or indexers let me know I can send you information on the ones that I make.

tomoneill [no e-mail]

Tom O'Neill
2706 Chase Rd
Weedsport, NY 13166

Star Reloaders / Re: Greetings
« on: July 31, 2006, 04:35:25 pm »

Thanks for your interest. Please try tomoneill [no e-mail]  I have a new email address.

Tom O'Neill
2706 Chase Rd
Weedsport, NY 13166

Star Reloaders / Re: Greetings
« on: July 29, 2006, 10:16:21 pm »

Glad to hear your getting back into bullseye shooting.
If you or anyone you know would be interested in information on a case feeder and an EZ loader or a indexer for your Star loader please let me know. They are both high quality accessories that I make for the Star.


Star Reloaders / Re: Introducing Myself
« on: July 05, 2006, 05:43:40 pm »

Do you need a case feeder or indexer for your Star loader? Keep me in mind if you or someone you know would be interested in more information.

Thanks TDO

Star Reloaders / Re: problem with hulme case feeder
« on: June 10, 2006, 09:26:14 pm »
Also the top piece may need to be turned 180 degrees. The top piece may have been machined out to accept the .44 mag. If you turn it that will make he channel shorter and the case may not flip over.
Do you need an indexer for your press?

Star Reloaders / Re: problem with hulme case feeder
« on: June 09, 2006, 05:46:47 pm »
Are you sure it is a spring problem? Is the case feeder level with the press where the case is fed in? The triangular piece that it mounted on the head should allow the case to be fed smoothly. Maybe that needs  adjusting.

Star Reloaders / Re: Interesting Star Reloader on eBay
« on: March 07, 2006, 06:05:21 pm »
The most important thing is the condition of the press. I can always set you up with a case feeder or indexer, if needed. The press looked in excellent condition.

Star Reloaders / Re: Green Star? Reloader on eBay
« on: February 10, 2006, 06:16:43 pm »
I would also be very suprised if that is a Star press. I thought the same thing about the base. The lifting arms also looked to big. Someone will be in for a surprise.

Star Reloaders / Re: shell plates
« on: January 11, 2006, 09:52:58 pm »
Have you tried Bill Cunningham?
starmachineworks [no e-mail]@

Star Reloaders / Re: Star Press Mounting Solutions
« on: January 07, 2006, 04:10:14 pm »
Very nice.

Star Reloaders / Re: Star Universal Turns Hard
« on: December 31, 2005, 07:55:09 am »
Yes, cleaning should help. Then adjust as described.

Pages: 1 2 3 »