Author Topic: WTS Primer Magazines, Primer Pickups and Follower Rods  (Read 12609 times)

0 Members and 1 Guest are viewing this topic.

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
WTS Primer Magazines, Primer Pickups and Follower Rods
« on: August 10, 2014, 07:46:13 pm »
I offer both standard length (13 inches) and Long (15 1/4 inch) primer magazines and follower rods to match.  The 15 1/4" primer magazines easily hold 100 primers.   

Primer Magazines, Standard Length or Long version are $35 each.

Primer Follower Rods, standard or long are $15 each.

I also offer primer pickup tubes, both standard length (~9") and long versions which hold 100 primers.

Standard and Long Small Primer Pick up tubes are $10 each.

Standard and Long Large Primer Pick up tubes are $15 each.

Plus shipping of course.   StarMachineWorks at ptd dot net
« Last Edit: January 22, 2016, 09:18:52 pm by rbwillnj »
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

tony barone

  • Active Members
  • ***
  • Posts: 148
    • View Profile
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #1 on: March 06, 2015, 01:00:08 pm »
Star owners are fortunate to have Bruce as the owner of Star. Parts are comparable if not better than original.

Green Frog

  • Active Members
  • ***
  • Posts: 59
    • View Profile
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #2 on: March 10, 2015, 12:59:31 pm »
Let me add my praise to the above.  I "sat on" a beautiful old Star Progressive for close to 20 years because it was missing a couple of parts to make it right.  Bruce is The Man!  :) His parts and service for the Star are second to none.

A satisfied customer, the Green Frog

Buckhunter

  • Active Members
  • ***
  • Posts: 99
    • View Profile
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #3 on: March 15, 2015, 11:24:38 am »
 I agree with the guys above, Bruce is wonderful to deal with and
 always provides outstanding parts and anything that he makes for
 the Star equipment is first rate. He has provided large powder
 magazines, Primer magazines and follower rods for me and all of
 these products are very well made by him. We in the Star community
 are lucky to have someone of his caliber that can provide wonderful
 parts for our Star machines. Five Stars for Bruce *****.


 Buckhunter

BillA

  • Posts: 1
    • View Profile
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #4 on: August 06, 2017, 02:41:20 pm »
How do I go about ordering the primer magazines?

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #5 on: August 06, 2017, 09:34:35 pm »
Give me a call or send me an email with your name and shipping address and I will send you an invoice with payment instructions.

Bruce Williams
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #6 on: January 23, 2018, 03:46:56 pm »
Bump
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

demotu

  • Active Members
  • ***
  • Posts: 10
    • View Profile
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #7 on: April 06, 2018, 07:49:03 pm »
Scott Clark here.
I have an older Star .38 spl (NOT a Universal tool) which I would like to convert to 9mm.  Do you have or make all the parts I would need for that?  I also have a relatively new  Universal tool- would you know where I can get a complete conversion to 9mm for it if the older tool would not work out?
thanks,
Scott Clark
(760) 937-3295

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #8 on: April 06, 2018, 10:21:44 pm »
I’ll give you a call on Saturday,  or you can call me.

Bruce Williams
Star Machine Works



Scott Clark here.
I have an older Star .38 spl (NOT a Universal tool) which I would like to convert to 9mm.  Do you have or make all the parts I would need for that?  I also have a relatively new  Universal tool- would you know where I can get a complete conversion to 9mm for it if the older tool would not work out?
thanks,
Scott Clark
(760) 937-3295<br [no [no e-mail]@.com
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: WTS Primer Magazines, Primer Pickups and Follower Rods
« Reply #9 on: December 01, 2019, 02:07:02 pm »
Bump
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com