Messages

61

Stars Want to Sell/Want to Buy / Re: WTS Hulme Top Plates M3, M3A and 9MM

« on: March 31, 2012, 01:45:33 am »

Bruce
Heat the Spring material, shape it & reheat and cool in oil..

62

Star Reloaders / Re: Star vs. Dillon

« on: March 31, 2012, 12:49:34 am »

Kenneth
I have a USED Green Machine if you are interested.......Cheap..!!!

This is the loader.....No green Die Boxes came with the loader....I think it has .45 dies in it.....

63

Star Reloaders / Re: Hulme feed tube question

« on: March 30, 2012, 06:23:51 pm »

They should work.........Try loading some .38 cases in one and SEE if they work.........
I've used the same size for both, .38 & .45 for years...............


That's my nickels worth.............

64

Star Reloaders / Re: Rich Daniels

« on: March 27, 2012, 03:08:18 am »

Just in case, here's his email address::

rdaniels36(at)cox(dot)net

65

Star Reloaders / Re: Star Reloader Indexing?

« on: March 18, 2012, 09:14:10 pm »

30calfun
Check this web site out, it's the BEST INDEXER Out there.......

http://www.sbsdistributing.com/index.php?pr=Star_Press_Accessories

Brief Instructions: The safety cam snaps into place when a loaded round hits that station.  You need to manualy push the safety cam back after removing the round from that station.  The idea is to force the operator to stop and reset the safety cam so the press can operate.

Click on the Picture, this might give you a hind for installing............

66

Stars Want to Sell/Want to Buy / Re: Stud type taper crimp die

« on: March 15, 2012, 01:08:00 am »

Maybe they had those left in stock...........
or
I quess you're just lucky Lindy.......

67

Star Reloaders / Re: Star vs. Dillon

« on: March 14, 2012, 03:49:21 pm »

Different Strokes for Different Folks

68

Stars Want to Sell/Want to Buy / Re: Stud type taper crimp die

« on: March 13, 2012, 06:23:12 pm »

Lindy
The later Model Star Heads were drilled & taped for 11/16 x 24 TPI......SO,
It would be proper to do that for your Head.....

My Nickel worth..........

69

Stars Want to Sell/Want to Buy / Re: Stud type taper crimp die

« on: March 13, 2012, 03:20:44 am »

Lindy
Try fc60 (Dave Wilson) he has made that type before, you  might get him to
make one for you........

70

Stars Want to Sell/Want to Buy / Re: WTB 5/8 powder bars

« on: March 07, 2012, 02:16:40 pm »

Please observe..Proper format for emails....

Try him at this:
starmachine(at)volcano(dot)net

To get the Program(Forum) to not blank out the email, you have to spell out  'AT' & 'DOT'

Then put the proper 'signs' in when you email him with your emailer.......

71

Stars Want to Sell/Want to Buy / Re: WTB 5/8 powder bars

« on: March 06, 2012, 08:20:22 pm »

I'm not a machinist, but if you have a source to do that work, making a spring pin
& install the rollers........ROCK ON My Man.........
You still should try (Barrel tester) and see if he would do the work...........

72

Stars Want to Sell/Want to Buy / Re: WTB 5/8 powder bars

« on: March 05, 2012, 09:01:35 pm »

That powder slide doesn't have a Spring holder pin and probably doesn't have
the two rollers.............
You might try R.Bruce Williams (rbwillnj), he offers a 1/2" Powder Slide with 2 Bushings
and spacers.......Reasonable price.......

bwilliams853(at)embarqmail(dot)com

I'll give you  top part of the powder Housing if you need one.........

73

Stars Want to Sell/Want to Buy / Re: WTB 5/8 powder bars

« on: March 05, 2012, 01:58:44 am »

Get in touch with (Barrel tester) Richard Daniels, this Forum.........
He make all the sizes of powder Slides and Adjustable....
Email is the best..............

rdaniels36(at)cox(dot)net

74

Star Reloaders / Re: How do you catch rounds after case kicker?

« on: February 24, 2012, 09:43:43 pm »

That's great, you solved your problem..........

75

Star Reloaders / Re: How do you catch rounds after case kicker?

« on: February 21, 2012, 07:41:08 pm »

Walking
You just have to improvise, say, drill/cut a hole in your table, put some kind of slide and a box underneath,,