Messages

331

Star Reloaders / Re: PORTABLE STAND

« on: February 25, 2011, 10:19:22 pm »

Bruce
I'll email the pictures to you..
Just mention that we're re-finishing the floor....

332

Star Reloaders / PORTABLE STAND

« on: February 25, 2011, 11:16:59 am »

Hey Guys
Just built a Bench stand...
Check Sears:
Sears Item # 00922020000 | Model# 22020    $34.99
I got two  1" x 15"  Round boards from Lowes...Spaced them out so I could insert a Acro-Bin under the top board to catch rounds.. Used a PVC setup to drop primers to a Bottle under the bottom board...
Really turned out nice
I'd post pics, BUT, I don't know how, But, I can email pics...

333

Star Reloaders / Re: #25 Primer Punch Spring

« on: February 22, 2011, 10:44:40 am »

tguntrader
I believe you have your springs mixed up......
#25 is the short spring approx, 3/4" long & approx. 1/4" OD..
that is used to return the #24 Primer Punch.........
You're thinking about #23 Primer Slide Spring

334

Star Reloaders / #25 Primer Punch Spring

« on: February 22, 2011, 10:01:28 am »

Hey Guys
Since this spring is hard to find..
Does anybody know the Dimensions:   
Example::
Wire diameter:
Overall Length of the spring:
&
OD of the Spring:
 

335

Star Reloaders / .45 COLT DIE SET

« on: February 18, 2011, 06:13:46 pm »

Hey Guys
Just received my Colt Dies from fc60....
Talk about FANTASTIC !! Workmanship !!!  HE'S THE KING !!!!
These dies LOOK ABSOLUTLY GREAT !!!!

336

Star Reloaders / DIFFERENCE BETWEEN #18 & #18T

« on: February 15, 2011, 01:19:08 pm »

Dumb question,
But, is there a quick/evident visual check to tell the difference between the #18 Roll Crimp Die and the #18T Taper Crimp Die..

And another question,  
Is there a drawing/template that shows the Die layout on the Head..

Just a though for any newbies........

337

Stars Want to Sell/Want to Buy / Re: H&G MOULD HANDLES

« on: February 13, 2011, 07:53:44 pm »

What handles will substitute for H&G handles..

i should have asked that way first...

338

Star Reloaders / Re: PURCHASED STAR

« on: February 13, 2011, 06:31:47 pm »

Forgot about the Shellplate, with my limited funds that cost will be difficult...
MAYBE.. If I can Sell/Swap the .32 Dies & Shellplate I can afford this

.32 Dies & Shell Plate SOLD

339

Star Reloaders / PURCHASED STAR

« on: February 13, 2011, 05:49:31 pm »

On the 25th of last month, I purchased a Universal, lots of extra dies, & Low & Behold I ended up with 4 extra heads...One was a Phelps w/.32 Dies (Black) & Shellplate....
(If anybody interested in the Dies & Shellplate I'll let them go for $200.00).
SOLD
Carrying on > after recent scrutiny, one was drilled out for 7/8" Dies....So much for origional.......
With my RCBS, Dillon & Lee dies I'll try and set it up for .44 Magnum, say with RCBS Dies....
I'll probably have to get fc60 to make me a #16 - Shell Expander Plug....What else
Any comments PLEASE..

340

Stars Want to Sell/Want to Buy / H&G MOULD HANDLES

« on: February 12, 2011, 07:02:16 pm »

I know this a Star Forum, BUT, H&G go hand in hand with Star...
I just acquired a 4-cavity H&G mould..
I need Handles for it...

341

Star Reloaders / Re: POWDER CUT-OFF by Maurice Lewis

« on: February 11, 2011, 06:29:17 pm »

rbwillnj

Under 'Star Reloaders'
Page 4

Look for posting images

You'll see a picture of the Powder Cut-Off

342

Star Reloaders / Re: POWDER CUT-OFF by Maurice Lewis

« on: February 10, 2011, 04:07:57 pm »

Hugh Tyer
His Forum name is  'maurilew'
Do a search for his name

343

Star Reloaders / Re: POWDER CUT-OFF by Maurice Lewis

« on: February 10, 2011, 02:02:22 pm »

Only problem with MA's products, they're either none to be had or hard to find..

WHOOOPS!
I was thinking / Assuming you were talking about the M-A Products
Dis-regard what I said..

344

Star Reloaders / POWDER CUT-OFF by Maurice Lewis

« on: February 10, 2011, 12:31:45 am »

I don't want to cut short Maurice's Powder Cut-Off...
This Accessorie is also FANTASTIC workmanship and a  FANTASTIC design..
This also is a must if you have more than one Head..

345

Star Reloaders / POWDER CUT-OFF by Scott Lorenz

« on: February 10, 2011, 12:25:46 am »

Hey everybody..
Just received a NEW Designed Powder Cut-Off from Scott Lorenz..
This Accessorie is FANTASTIC, Workmanship also is FANTASTIC..
I asked him to re-Post pictures of the Re-designed Powder Cut-Off..
A must for everbody......