Author Topic: BREWSTER  (Read 11204 times)

0 Members and 1 Guest are viewing this topic.

askimball (Doc)

  • Active Members
  • ***
  • Posts: 471
  • Cell - 318-518-0829 Central Time
    • View Profile
BREWSTER
« on: February 04, 2011, 01:28:23 pm »
I know this subject has been ridden hard and put up wet.. :o ::)
A poster made mention that the Brewster pushed on the cartridge case not the shell plate...
Some say it damages the shell plate and the base... ??? ??? ::)
What's up.......... ??? ???
« Last Edit: February 04, 2011, 02:00:49 pm by askimball »
Doc - I.Y.A.A.Y.A.S.
Retired Police Captain

Kirk A

  • Active Members
  • ***
  • Posts: 64
    • View Profile
Re: BREWSTER
« Reply #1 on: February 04, 2011, 02:51:23 pm »
The Moon Unit pushes on the cartridge case too. And it works just fine...
Distinguished Pistol
Distinguished Revolver

ARTINCT

  • Active Members
  • ***
  • Posts: 117
    • View Profile
    • Lithics Net
Re: BREWSTER
« Reply #2 on: February 04, 2011, 03:34:35 pm »
I have 4 Moon Unit Indexers running on my four Universals.
The .45 and .38 SuperComp machines get the heaviest use and
I see no signs of wear on the shell plate, base or anywhere else.
I frankly would not run a Star without a Moon Unit indexer.
Once the machine is set up with the case kicker (if you taper crimp),
and functions well, then add the Indexer.  The only thing I have to do
is watch the case feeder, primer and put a bullet on the charged case.
I can knock of 50 rounds in a very short amount of time.

Ray has done a wonderful job on the Moon Unit.
Art In Connecticut

MikeA

  • Active Members
  • ***
  • Posts: 53
    • View Profile
Re: BREWSTER
« Reply #3 on: February 04, 2011, 04:58:05 pm »
Ray has done a fantastic job on both the Moon Unit and case kicker.
I found the following information on the 'Brewster' if anyone is interested.
Semper Fi,
Mike A

Joatmon

  • Active Members
  • ***
  • Posts: 90
    • View Profile
Re: BREWSTER
« Reply #4 on: February 04, 2011, 08:53:57 pm »
Thanks for the information Mike.  I have an old Brewster downstairs in the basement and was wondering if it was much of a trick to get it set up correctly.  I agree though, the Moon Unit is a much higher quality device based on my short experience with it.

John

askimball (Doc)

  • Active Members
  • ***
  • Posts: 471
  • Cell - 318-518-0829 Central Time
    • View Profile
Re: BREWSTER
« Reply #5 on: February 04, 2011, 10:26:51 pm »
I want to thank you guys for Brewster Instructions.... :-*
Now, does anybody have a Parts Templet/diagram Break down for the Indexer.. ??? :-[
I have a part/s that attaches on one of the legs of the indexer, not sure what it does.. ??? ??? ::)


Updated:  2/9/2011
« Last Edit: February 10, 2011, 12:02:04 am by askimball »
Doc - I.Y.A.A.Y.A.S.
Retired Police Captain

saltydog

  • Active Members
  • ***
  • Posts: 41
    • View Profile
Re: BREWSTER
« Reply #6 on: February 05, 2011, 11:43:31 am »
I'm guessing the Brewster is no longer in production, but the Moon accessoey is available?

If so, can anyone provide any information about the Moon part?

Thanks,

salty


rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: BREWSTER
« Reply #7 on: February 05, 2011, 11:50:57 am »
Contact Ray Brandes on this forum.

See it in action here:  http://www.bullybarrel.ray-vin.com/frindexer.htm
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

ARTINCT

  • Active Members
  • ***
  • Posts: 117
    • View Profile
    • Lithics Net
Re: BREWSTER
« Reply #8 on: February 05, 2011, 11:51:28 am »
If you do a google search on MOON UNIT INDEXER you will find the Youtube video and Ray Brande's web site which describes and shows
the product in use.
Art In Connecticut

saltydog

  • Active Members
  • ***
  • Posts: 41
    • View Profile
Re: BREWSTER
« Reply #9 on: February 05, 2011, 03:42:49 pm »
Got it.  Thanks.