Star Reloaders Discussion Forums > Star Reloaders

Need Help Identifying Star Parts

<< < (2/2)

fc60:
Greetings,

Star did not use Stainless Steel for the drop through bushing.

I would double check the fit of the bushing.

Should be 0.750" diameter and, I forget, 1.000" long.

The Brass bushing could be used as a guide for the case tubes entering the feeder housing.

Cheers,

Dave

30calfun:
Dave, it might not be stainless, but it's a brushed silver color and is definitely steel. It measures 0.75 OD and the height is 0.705 of and inch. I think it is the drop through bushing as the machine is set up for 45 ACP currently and I do have a 38 tool head and set up parts for it.

Regarding the brass bushing, I was also thinking it could be a case guide for 38 Special brass, as 45 brass will not fit through it but 38 will with some room to spare.

Thank you for the help!

Navigation

[0] Message Index

[*] Previous page