Star Reloaders Discussion Forums > Star Reloaders

Need Help Identifying Star Parts

(1/2) > >>

30calfun:
I have 3 parts that I think go with either my Star press of my Star resizer/lubricator. The AA battery in the pics is for scale. Any help is much appreciated, thanks.

NYKenn:
Fairly confident in saying they are not press parts. I do not recognize at all.  Lubrisizer: maybe, do not know.
Bruce Williams (RBWillNJ) on this site, is able to tell you conclusively.
good luck!

fc60:
Greetings,

Top photo, item on top right. This is a HyCar washer for the Star Greaser.

Sleeve at bottom is the tapered drop bushing that goes into the base of the Star at the last station. It was used to allow 38 Special rounds to fall through the base into a collection bucket under the bench.

Seating and crimping was all done in one operation at the previous station.

The other sleeve is a bit of a mystery...

Cheers,

Dave

NYKenn:
Dave
Probably right on the drop through bushing. Picture not really clear showing the taper.
 I tried to use the grid for sizing.
Good eye.

Kenn

30calfun:
The stainless bushing is tapered, the brass bushing is not. The brass bushing fits in the horizontal plunger hole in the case feeder, but since it's hollow, I'm not sure if it goes with the case feeder.

Navigation

[0] Message Index

[#] Next page