StarReloaders.com Discussion Forum
Star Reloaders Discussion Forums => Star Reloaders => Topic started by: askimball (Doc) on January 18, 2011, 09:54:49 am
-
Question ???
As a General rule should all Auto cartridges for the Star have the Taper Crimp Die installed.. ??? ::)
-
Absolutely ...YES
-
SO,
Does Dillon & Lee Dies have built in Taper Crimps in their Dies for the auto calibers.......... ??? ::)
-
Everybody offers dies for doing a taper crimp in a separate station.....which is where it should be done. Some makers offer seating dies with taper crimps, some with roll crimps. Older Hornady seating dies for autoloading cartridges used to incorporated a roll crimp, newer Hornady seating dies incorporate a taper crimp. Lee offers seating dies with what they call a modified roll crimp which they say you can adjust to just do a taper crimp.
My opinion, (and most reloading manuals would agree) is that a taper crimp should always be done separately from bullet seating. Roll crimping can be done in the seating step, but only if the bullet has a crimp groove, or you are crimping over the shoulder such as with a 38 wadcutter.
-
Thought you might like to know this if you don't already know :D ;D
NOTE: All Dillon Pistol Die sets include our sizer / decapping die, seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)