Author Topic: Phelps indexer  (Read 8770 times)

0 Members and 1 Guest are viewing this topic.

billk

  • Guest
Phelps indexer
« on: April 04, 2013, 11:29:42 am »
Does any one have instruction how to set up a phelps indexer?

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: Phelps indexer
« Reply #1 on: April 04, 2013, 02:49:16 pm »
So far as I know, Phelps never made an indexer.  However, there was one type of indexer that could be used on a Phelps, so I'm guessing that's what you have.   I believe the manufacturer might have been Capital as I have some correspondence from Phelps that recommends that indexer. 

The one that I'm speaking of has a couple of wheels and a braided wire cable.   It mounts on the back of the machine using the threaded hole in powder slide cam and the safety cam standard.  I have several of them that I'm not using.
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

333OKH

  • Active Members
  • ***
  • Posts: 153
    • View Profile
Re: Phelps indexer
« Reply #2 on: June 18, 2013, 03:07:20 pm »
Bruce, you said you had some wire cable indexers, that were used on Phelps, would it work on one of my universal machines, George.
George Tucker
NRA Life Member
USMC Life Member

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: Phelps indexer
« Reply #3 on: June 18, 2013, 10:13:58 pm »
George,

The ones that I have all came in on Phelps reloaders and I have never tried them on a Star.   I don't know why they wouldn't work on a Star, but I can't say for sure.   I have a couple Brewsters too.

We can talk about it more when I get back from vacation.
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

Buckhunter

  • Active Members
  • ***
  • Posts: 99
    • View Profile
Re: Phelps indexer
« Reply #4 on: June 19, 2013, 03:22:38 pm »
Personal Message (Offline)
Re: Phelps indexer
« Reply #2 on: Yesterday at 01:07:20 PM »
   Reply with quoteQuote
Bruce, you said you had some wire cable indexers, that were used on Phelps, would it work on one of my universal machines, George.
   Report to moderator   Logged
George Tucker
 George, I have an M-A Indexer with instructions and pictures
 of it set up. It uses the Universal Angle lever Cam's screw to attach
 it to the Star Universal. Then about four inches away from the base
 you have a small post that is secured by two screws, When the toolhead
 goes back to the top a hook pulls the case to the next position to wait
 for the next operation. See the operation at: http://www.sbsdistributing.com/index.php?pr=Star_Press_Accessories.
 Buckhunter   My e-Mail address is under my name in the members listing.

Buckhunter

  • Active Members
  • ***
  • Posts: 99
    • View Profile
Re: Phelps indexer
« Reply #5 on: June 19, 2013, 03:25:46 pm »
 Disreguard previous message as that was the operation of the Moon
 indexer, I do have instructions and pictures of how the M-A Indexer
 works.
 buckhunter