Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - varmintpopper

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 »
76
Star Reloaders / Star loader with extras
« on: April 16, 2018, 03:42:33 pm »
https://imgur.com/a/bDH5m

The above link is a picture of one of my star re loaders set up with a MA systems Bullet feeder, Homemade bullet collator, Case feeder and homemade case collator, Adjustable powder bar and finished cartridge ejector and Moon unit. This loader is capable of 1500 -2000 rounds an hour depending on how fast You can pull the handle. This one is set up for 40 S&W.

Good shooting

Lindy

77
Star Reloaders / Re: Need help with the press mount
« on: March 22, 2018, 05:32:18 pm »
Javaduke
Here is a pic of one of my Stars. The square pink container slides under the base for catching primers and the completed rounds fall into the bread pan.  I have several stars, all mounted the same way. they can be bolted in the same spot on the bench as needed. The stand offs are 1/2 inch conduit with washers welded on.

78
Star Reloaders / Re: Video, Bullet feeder on a Star
« on: March 15, 2018, 04:48:55 pm »
Hi John
The nose of the bullet is smaller than the butt, and the Butt is flat whereas the nose is tapered, if the nose is facing downward is falls into a cut out portion of the floor and lays down onto its side and is then turned upright by a ramp and then dropped into a feeder tube through a hole in the floor. If the Butt of the bullet is facing downward, it will pass by the hole in the floor and remain in the correct upright position.

Clear as a bell ,,, Right ?

Good Shooting

Lindy

79
Star Reloaders / Re: Video, Bullet feeder on a Star
« on: January 21, 2018, 01:49:36 am »
Added a homemade bullet collator to feed My MA Systems bullet feeder.

https://www.youtube.com/watch?v=gGwJd9n4HLU&feature=youtu.be

Good Shooting

Lindy

80
Star Reloaders / Re: MA systems bullet feeder
« on: December 25, 2017, 01:42:20 pm »
There are still some out there but are no longer manufactured.
The Company that made them is still around, M-A Systems Inc. Pryer Oklahoma

Good Shooting

Lindy

81
Star Reloaders / Re: MA systems bullet feeder
« on: December 24, 2017, 01:34:16 pm »
Hi Kenn
I haven't tried lead Yet but see no reason why it would not work with lead bullets, The bullets are required to be round nosed or pointed to work in the bullet collator, but if You could find a way to feed lead wadcutters into the bullet feeder, it should work.

Good shooting

Lindy
 

82
Star Reloaders / Re: MA systems bullet feeder
« on: December 22, 2017, 12:10:44 am »
TY Bruce, that is exactly what went wrong, uploaded the video as private. But I have corrected that and changed all the links in MY essages to allow seeing the video.

https://youtu.be/0FvugNjO42I

Good shooting

Lindy

83
Star Reloaders / Video, Bullet feeder on a Star
« on: December 21, 2017, 11:00:14 pm »
Utube link to a Star with an MA systems bullet feeder doing its thing.

https://youtu.be/0FvugNjO42I

Good shooting

Lindy

84
Stars Want to Sell/Want to Buy / Re: MA System Bullet Feeder
« on: December 15, 2017, 08:04:33 pm »
The MA systems Bullet Feeder in action.

https://youtu.be/0FvugNjO42I

Good shooting

Lindy































85
Star Reloaders / Re: MA systems bullet feeder
« on: December 15, 2017, 12:01:04 pm »
Perhaps this video will work. MA systems bullet feeder on a Star reloader.

https://youtu.be/0FvugNjO42I


Good Shooting

Lindy

86
Star Reloaders / Re: MA systems bullet feeder
« on: December 07, 2017, 05:35:11 pm »
Hi 4-star
There is a direction valve shown in the second Pic down that is located near the tool head spring anchor#57 that reverses the air pressure to the pneumatic
cylinder and the bullet holder tries to retract away from the machine but is cought on a step , when the tool head comes down it pushes the bullet holder down and off the step allowing it to retract and pick up another bullet.
Clear as a bell,, Right.

Good Shooting

Lindy

87
Star Reloaders / Re: MA systems bullet feeder
« on: December 07, 2017, 12:23:08 am »
more Pic's

88
Star Reloaders / Re: MA systems bullet feeder
« on: December 06, 2017, 10:00:26 pm »
More Pic's to follow

Good shooting

Lindy

89
Star Reloaders / Re: MA systems bullet feeder
« on: December 03, 2017, 05:18:12 pm »
I think this link may work to show My MA systems bullet feeder in action,,,, someone let me know if it opens for You.


https://youtu.be/0FvugNjO42I

Good Shooting

Lindy

90
Star Reloaders / Re: MA systems bullet feeder
« on: November 30, 2017, 10:46:23 pm »
I tried to post a video of the new to me MA systems bullet feeder in operation, But found out videos are not on the list of things You can download. perhaps I can put it on a video hosting sight and then post the link. In any case the thing works like a champ !


https://youtu.be/0FvugNjO42I



Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 »