Author Topic: .357 on a Progressive ?  (Read 4662 times)

0 Members and 1 Guest are viewing this topic.

soup

  • Posts: 2
    • View Profile
.357 on a Progressive ?
« on: March 27, 2018, 09:42:03 pm »
 
Folks.
I just acquired my first Star press . It’s a Progressive in .38 Special . Can I load .357 magnums ?

If so what must I change and how do I go about it . I know I’ll need a new powder bar as the one in my press is for 3.5 grains of Bullseye .

If anyone can inform me where to get a different powder , and what sizes are available I’d appreciate it .

Thank you in advance for your time and consideration.

Semper Fi
Soup

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: .357 on a Progressive ?
« Reply #1 on: March 28, 2018, 08:24:06 am »
Yes, you can load .357 on a Progressive.   

You will probably need a Magnum length Expander (shorter).  The 38 Special Expander will probably interfere with the powder slide when raised enough to load .357 Magnum.  Depends on the machine.

If you will be loading full Magnum loads, you will want a 1/2" powder slide and either a set of spacers or a 1/2" powder slide housing.

If you have a case feeder, you will want an M3A top plate for the Magnum length cases.

You may want a different seating stem for you seating die depending on the bullet.

I can help with all of the above

Bruce Williams
Star Machine Works

PS  The powder slides I offer use interchangeable bushings, so I can do pretty much any charge you like.
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com