Author Topic: Hulme Case feed  (Read 6204 times)

0 Members and 1 Guest are viewing this topic.

grlflh

  • Active Members
  • ***
  • Posts: 41
    • View Profile
Hulme Case feed
« on: April 26, 2012, 10:22:13 pm »
Does anyone have any experience with a case feed like this? Is the hole on the side at the bottom how it is attached to the press?


Thanks

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: Hulme Case feed
« Reply #1 on: April 26, 2012, 11:47:20 pm »
It is one of the many versions of the Hulme case feeder.   It attaches to the reloader with an Allen socket head screw like other versions, but uses a shorter screw than later models.  The hole in the side is to help hold/guide the screw as its being threaded into the base.

I think I have cataloged six or seven versions of Hulmes now....mostly slight variations.
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com