StarReloaders.com Discussion Forum
Star Reloaders Discussion Forums => Star Reloaders => Topic started by: varmintpopper on November 06, 2017, 05:50:07 pm
-
Howdy All
Does anyone out there have an instruction manual/Parts list for the MA System Bullet Feeder.
I recently aquirred one and am trying to install it on one of My Star reloaders. I need to know
where the push button type air valve should be installed on the Star loader. All help appreciated !
miltonetime (at sign) aol (dot) com
Good Shooting
Lindy
-
Hi Lindy,
I tried to send you the manaul but AOL kicked it back because the file is to large.
Go to the following link to download the complete manual:
http://m-asystems.com/ph/pdfs/manual.pdf
Good shooting,
Joe
-
Joe
Thanks for the Manual on the collator, I down loaded it and printed a copy for My file.
What I really needed was the manual on the bullet "FEEDER" if You have a link to that I would
appreciate it.
Good shooting
Lindy
-
Joe
Me again,,, I just got an Email from M.A. Systems with the file for down loading the Instructions for the Bullet Feeder. So I am all set for Manuals.
Thanks again for Your help.
Good Shooting
Lindy
-
I tried to post a video of the new to me MA systems bullet feeder in operation, But found out videos are not on the list of things You can download. perhaps I can put it on a video hosting sight and then post the link. In any case the thing works like a champ !
https://youtu.be/0FvugNjO42I
-
I think this link may work to show My MA systems bullet feeder in action,,,, someone let me know if it opens for You.
https://youtu.be/0FvugNjO42I
Good Shooting
Lindy
-
I get a 404 error. It would be awesome to see this thing in action.
-
Able to log into Google but same 404 error code.
-
Same here.
-
More Pic's to follow
Good shooting
Lindy
-
more Pic's
-
Thanks. Very interesting pictures.
What causes the bullet holder to retract before the seating die hits it?
-
Hi 4-star
There is a direction valve shown in the second Pic down that is located near the tool head spring anchor#57 that reverses the air pressure to the pneumatic
cylinder and the bullet holder tries to retract away from the machine but is cought on a step , when the tool head comes down it pushes the bullet holder down and off the step allowing it to retract and pick up another bullet.
Clear as a bell,, Right.
Good Shooting
Lindy
-
Perhaps this video will work. MA systems bullet feeder on a Star reloader.
https://youtu.be/0FvugNjO42I
Good Shooting
Lindy
-
Unavailable....
-
Lindy, I'm guessing you uploaded your video to YouTube as a Private video, which means only you can see it. If you upload it as an unlisted video and post the link here, we should all be able to see it.
-
TY Bruce, that is exactly what went wrong, uploaded the video as private. But I have corrected that and changed all the links in MY essages to allow seeing the video.
https://youtu.be/0FvugNjO42I
Good shooting
Lindy
-
I'm able to see the video now, very nice setup I must say.
-
Very nice indeed!
Can the same speeds be achieved with lead?
-
Hi Kenn
I haven't tried lead Yet but see no reason why it would not work with lead bullets, The bullets are required to be round nosed or pointed to work in the bullet collator, but if You could find a way to feed lead wadcutters into the bullet feeder, it should work.
Good shooting
Lindy
-
Are they still available ?
-
There are still some out there but are no longer manufactured.
The Company that made them is still around, M-A Systems Inc. Pryer Oklahoma
Good Shooting
Lindy