Author Topic: WTS Hulme Top Plates M3, M3A and 9MM, .380, 32 S&W Long, 40 S&W  (Read 42327 times)

0 Members and 1 Guest are viewing this topic.

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1225
    • View Profile
    • Star Machine Works
I just finished a new run of Top Plates for the Hulme (and clone) case feeders

M3 type  $20   
This top plate is the standard top plate.  Use it to load 45 ACP, 38 Super, 38 Special, 41 Special and 44 Special.

M3A type $30
Use this top plate to load 45 Long Colt, 41 Magnum and 44 Magnum

9MM  $35

32 S&W Long   $35

40 S&W  $35

.380 Kit, includes a replacement piston for the case feeder      $60

32 ACP Kit, includes replacement piston for the case feeder     $60


Add $6.50 per shipment for Ground Advantage Shipping
« Last Edit: June 09, 2024, 08:06:18 pm by rbwillnj »
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

rcfoster

  • Active Members
  • ***
  • Posts: 13
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #1 on: December 23, 2011, 12:04:09 am »
I would like a M3

Live2Ride

  • Posts: 1
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #2 on: December 25, 2011, 10:06:59 am »
I would like a 9mm.
Dan underscore harben at msn dot com

Thanks,
Dan.  ;D
« Last Edit: December 25, 2011, 10:09:01 am by Live2Ride »

Marshal Kane

  • Active Members
  • ***
  • Posts: 21
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #3 on: March 26, 2012, 04:00:33 pm »
Still have some available.

Would like to buy an M3 and if you have any, a tube clamp.

karl dot young one at cox dot net

Marshal Kane

  • Active Members
  • ***
  • Posts: 21
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #4 on: March 29, 2012, 06:14:50 pm »
Karl,   Email Sent
I just received my M3 top plate today and I can honestly say that I'm blown away by the workmanship and quality of materials!  It's even got the M3 marking where it should be.

Anyone needing a top plate can take it from me that Bruce turns one out that is without equal!  Thank you Bruce for an amazing product.  Now if you'll only think about turning out a Hulme style feeder tube clamp . . . ;D ;D ;D     

Marshal Kane

  • Active Members
  • ***
  • Posts: 21
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #5 on: March 30, 2012, 10:31:07 am »
. . . Actually, I have all the materials to make the tube holders, just haven't had time to work on them.   I have to figure out a good way to bend the flat spring stock.

Bruce

Be sure to let us know when they are available ;D

askimball (Doc)

  • Active Members
  • ***
  • Posts: 471
  • Cell - 318-518-0829 Central Time
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #6 on: March 31, 2012, 01:45:33 am »
Bruce
Heat the Spring material, shape it & reheat and cool in oil..???
Doc - I.Y.A.A.Y.A.S.
Retired Police Captain

cminer

  • Posts: 1
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #7 on: May 10, 2012, 07:21:03 pm »
I need a M3 top plate for the Hulme Feeder. If you have any left I want one. Please advise

Marshal Kane

  • Active Members
  • ***
  • Posts: 21
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #8 on: June 03, 2012, 10:26:36 am »
Hi Bruce,

Do you still have any Hulme top plates for 9mm?  karl dot young one at cox dot net.

Marshal Kane

  • Active Members
  • ***
  • Posts: 21
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #9 on: June 07, 2012, 01:03:20 pm »
Received my 9mm Hulme top plate yesterday.  Never fails to impress me as to the excellent workmanship and quality of materials put into such a small item.  Thanks again for your fast service! 

Buckhunter

  • Active Members
  • ***
  • Posts: 99
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM
« Reply #10 on: November 26, 2012, 01:09:28 pm »
 :o Bruce,  I need a 9mm Hulme Top Plate. Thanks, Nelson
 buckhamman at comcast dot net

CLL1975

  • Active Members
  • ***
  • Posts: 10
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM, .380, 32 S&W Long, 40 S&W
« Reply #11 on: October 22, 2013, 10:50:26 am »
I need a 9mm

johnfreeman

  • Active Members
  • ***
  • Posts: 116
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM, .380, 32 S&W Long, 40 S&W
« Reply #12 on: October 31, 2013, 08:14:02 pm »
I just wanted to say that I got my top plate from Bruce and it's a very finely made piece of gear

Thanks again Bruce
John

mdcrace1

  • Posts: 4
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM, .380, 32 S&W Long, 40 S&W
« Reply #13 on: November 20, 2013, 10:53:31 pm »
Received my M3 top plates and case feeders and tubes from Bruce and they are a work of art. Bruce is such a pleasure to work with and I will be doing more business with again for some powder charge bar setups. I would recommend Bruce to everyone.
Thanks again Bruce

Marshal Kane

  • Active Members
  • ***
  • Posts: 21
    • View Profile
Re: WTS Hulme Top Plates M3, M3A and 9MM, .380, 32 S&W Long, 40 S&W
« Reply #14 on: November 26, 2013, 09:33:05 am »
. . . Top Plates for the Hulme (and clone) case feeders

M3 type  $20  
This top plate is the standard top plate.  Use it to load 45 ACP, 38 Super, 32 S&W Long, 38 Special, 41 Special and 44 Special.


Add $5.15 per shipment for Priority Mail Shipping


Hi Bruce,

Need a M3 top plate and info on how to make payment.

karl dot young [no e-mail]@ dot net