StarReloaders.com Discussion Forum

Star Reloaders Discussion Forums => Loading Data & Reloading Procedures => Topic started by: askimball (Doc) on October 30, 2011, 09:03:10 pm

Title: HP JACKETED BULLETS
Post by: askimball (Doc) on October 30, 2011, 09:03:10 pm

Found in my Stash, some jacketed HP bullets... :o

They weigh approx. 135grs. ::)

and mike:

Approx .354

Can I use these to load .38 Super.. ???

It's a Caspian 1911 I put together..... :D  It has a Caspian Barrel..... :P

Title: Re: HP JACKETED BULLETS
Post by: varmintpopper on October 30, 2011, 09:45:49 pm

Doc

38 Super Automatic bullets are .356 Inches diameter , that's a couple thousands larger than the bullets from Your Stash. They would probably work OK if You can get them crimped tight enough , but I'm thinking accuracy may suffer. My 2 
http:// stevespages  DOT  com/page8d.htm

Good Shooting

Lindy

Title: Re: HP JACKETED BULLETS
Post by: askimball (Doc) on October 30, 2011, 11:34:36 pm

varmintpopper

Are .354 Bullets for 9mm.. ???

Title: Re: HP JACKETED BULLETS
Post by: varmintpopper on October 30, 2011, 11:51:14 pm

DOC
Take a look on the web page I listed on My above Post to You and You will see that the 9mm bullet dimensions vary a great deal. from .354 to .357 depending on the
country, gun type, etc., etc.  There are many different so called 9mm's

Title: Re: HP JACKETED BULLETS
Post by: askimball (Doc) on October 31, 2011, 12:09:58 am

I have a M16 with a 9mm barrel (Olympic Arms), also other calibers....
Suppose I could use them for it... ::)