Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - varmintpopper

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 »
151
Star Reloaders / Re: Question about dies
« on: July 19, 2014, 04:54:19 pm »
Dave
Perhaps this info will help, I'm sure that the more experianced will have the answer for You soon.

Case mouth:

.38 Spl.     .359 for lead
                .358 for jacketed

9mm        .3555

The .38 Spl case is of the straight wall type
The 9mm is tapered

Good Shooting

Lindy

152
Star Reloaders / Re: primer feeder misalignment
« on: May 29, 2014, 09:35:28 pm »
Hi Jerry
On page 4 of the Instruction Manual for the Star reloader is the following Paragraph:

                               NOTE: ESPECIALLY IMPORTANT
                   To adjust primer slide bend the cam (that operates the
                   angle lever) either in or out as necessary to cause the inner
                   end of primer slide to just touch the main column without
                   any strain on the angle lever when the handle is all the
                   way down.

I use a brass hammer to strike and bend the cam to make this adjustment. and never found it to be a problem.
I am always open to other methods and next time intend to try the shims as it sounds like a good Idea.

Good Shooting

Lindy

153
Stars Want to Sell/Want to Buy / Re: Hulme copycat
« on: May 04, 2014, 12:04:23 pm »
Only One Hulme copycat left for sale

Good shooting

Lindy

154
Stars Want to Sell/Want to Buy / Re: Hulme copycat
« on: May 03, 2014, 06:44:58 pm »
Still have 2 Hulme Copycat Case loaders available

miltonetime (at sign) aol (dot) com

Good Shooting

Lindy

155
Star Reloaders / Re: primer feeder misalignment
« on: April 22, 2014, 12:30:14 pm »
Wayne
The angle lever cam (# 49U)  can be bent slightly in or out to adjust the travel of the primer slide which should be just touching the center post with the head all the way to the bottom of its travel. 

Good shooting

Lindy

156
Stars Want to Sell/Want to Buy / Re: Hulme copycat
« on: April 13, 2014, 10:23:00 pm »
Thanks Joe for the Help !  Hoping You get a ton of bullets loaded with Your new Case Feeder.

Good Shooting

Lindy


157
Stars Want to Sell/Want to Buy / Re: Hulme copycat
« on: April 13, 2014, 04:58:32 pm »
There are 2 left for sale. They both have the M-3 top plate

Good Shooting

Lindy

158
Stars Want to Sell/Want to Buy / Re: Hulme copycat
« on: April 09, 2014, 11:21:25 pm »
One sold pending funds

Two remaining

Good shooting

 Lindy

159
Stars Want to Sell/Want to Buy / Hulme copycat (ALL ARE SOLD)
« on: April 09, 2014, 10:40:27 pm »
(ALL ARE SOLD)I have 3 of these for $100 PLUS SHIPPING.
I have them on all My machines and they work well.

If interested : miltonetime (at sign) aol (dot) com.

160
Star Reloaders / Star Manuals
« on: April 09, 2014, 01:11:47 am »
This site has Star operator manual as a PDF download, Also has many gun, reloading, and much reloading manuals
that some here may find of interest

.http://pdf.textfiles.com/manuals/FIREARMS/


Good shooting

Lindy

161
Star Reloaders / Re: Hulme Spring
« on: February 12, 2014, 10:36:57 pm »
Thanks for the Info Dave
If I cant find one using the specks that You listed then put me on Your I want one list IF You decide to manufature some.
I only need 6 springs though !

Good shooting

Lindy

162
Star Reloaders / Hulme Spring
« on: February 11, 2014, 01:13:25 am »
Anyone have a source for the compression spring for the Hulme Case Feeder ?
I looked through Mc Master Carr catalog but didn,t find anything that would work
as a replacement.

Good Shooting

Lindy

163
I don't know if this will help establish when the Jam nut was incorporated,but I purchased
Two Sizers from Star in 1956 and they have no jam nut.

Good Shooting

Lindy

164
Stars Want to Sell/Want to Buy / Re: M-A Systems bullet feeder
« on: January 23, 2014, 05:08:18 pm »
lukasboy
I have a complete Rotoease indexer and installation instructions excess to my needs.

miltonetime "at" aol "dot" com

Good Shooting

Lindy

165
Star Reloaders / Re: Brewster Indexer
« on: December 07, 2013, 04:56:12 pm »
George
Try this web site:   http://www.ray-vin.com/star/frbrewster.htm


Good Shooting

Lindy


Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 »