Author Topic: Need a couple parts for a progressive  (Read 7110 times)

0 Members and 1 Guest are viewing this topic.

3035Odell

  • Active Members
  • ***
  • Posts: 9
    • View Profile
Need a couple parts for a progressive
« on: June 26, 2014, 09:13:32 am »
Hi,

Looking for a couple parts for my .38 progressive. Mainly I need a #48 Primer slide angle lever. Could also use a  #23 Primer slide spring, and #28 Powder slide spring. I would really appreciate hearing from anyone that may be able to help.

Thanks!

3035Odell

  • Active Members
  • ***
  • Posts: 9
    • View Profile
Re: Need a couple parts for a progressive
« Reply #1 on: June 26, 2014, 01:13:05 pm »
Looks like I am covered on the springs now (Thanks!) , so I just need the #48 Primer slide angle lever.

ar dick harris

  • Active Members
  • ***
  • Posts: 79
  • retired BE shooter
    • View Profile
Re: Need a couple parts for a progressive
« Reply #2 on: June 30, 2014, 09:24:38 am »
Try Bill Cunningham at Star Machine Works here in California.

Regards
A.R"Dick" Harris
559-432-2568

3035Odell

  • Active Members
  • ***
  • Posts: 9
    • View Profile
Re: Need a couple parts for a progressive
« Reply #3 on: July 01, 2014, 10:19:57 am »
Try Bill Cunningham at Star Machine Works here in California.]


Thank you.  And thanks to fc60 for the springs!
« Last Edit: July 01, 2014, 03:59:13 pm by 3035Odell »