Author Topic: Making H&G molds  (Read 3492 times)

0 Members and 1 Guest are viewing this topic.

varmintpopper

  • Active Members
  • ***
  • Posts: 299
    • View Profile
Making H&G molds
« on: January 03, 2022, 02:12:58 am »
Star sold H&G bullet molds way back in history I've been told.

https://imgur.com/7DQ8lGn
https://imgur.com/ghpG2DN
https://imgur.com/69mMsk7

Good Shooting

Lindy
« Last Edit: January 03, 2022, 02:25:23 am by varmintpopper »

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Re: Making H&G molds
« Reply #1 on: January 03, 2022, 09:05:51 am »
Star price lists from as early and 1945 (the oldest I have) through the mid 60's specially list H&G bullet moulds.

Star apparently also sold H&G bullet moulds under their own name at least briefly.    I'm sure many of you saw the "Star Machine Works" stamped H&G 10 cavity mold on eBay a couple months ago.

Bruce Williams
« Last Edit: January 03, 2022, 09:15:45 am by rbwillnj »
Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

varmintpopper

  • Active Members
  • ***
  • Posts: 299
    • View Profile
Re: Making H&G molds
« Reply #2 on: January 03, 2022, 06:58:04 pm »
Hi Bruce
I have an H&G 10 banger in .38 cal, and 3 each 4 bangers that I store in the original cardboard shipping boxes postmarked 1956.
The 10 is heavy to work with but can produce lots of boolits in a hurry. I also have H&G in 44 cal, 45 ACP, 9mm and a couple other cals.
 Here is a pic of the 10 cavity setting on the bottom pour pot.
https://imgur.com/yPpInCd

Good Shooting

Lindy
« Last Edit: January 03, 2022, 07:02:53 pm by varmintpopper »

Green Frog

  • Active Members
  • ***
  • Posts: 59
    • View Profile
Re: Making H&G molds
« Reply #3 on: January 04, 2022, 05:31:10 pm »
Lindy, it looks like your ten spot mould would empty out that little pot in about two or three pours!   8) Manipulating it during fills and dumps should be great exercise though.  ;)

Froggie

NYKenn

  • Active Members
  • ***
  • Posts: 500
  • Distinguished Pistol Shot
    • View Profile
    • The Firing Line
Re: Making H&G molds
« Reply #4 on: January 04, 2022, 07:10:37 pm »
Lindy
Great to see pics of the early years.
Bruce: I remember seeing those,

My dad made bullets and I helped him as a kid. (In the 60s)
Had a 200 grain in 45 and a 148 grain in 38. 
Have his ingot trays, lead ingots, sizer, dies, and lube, but never found the moulds themselves.
As health concerns arose with melting lead, he may have sold them.
Wish I still had them though.

Good shooting.
Kenn



"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms shall not be infringed"

varmintpopper

  • Active Members
  • ***
  • Posts: 299
    • View Profile
Re: Making H&G molds
« Reply #5 on: January 04, 2022, 09:43:29 pm »
GreanFrog
That little pot holds about 20 Lbs of lead and gets refilled when needed from two other pots that holds an additional 2o Lbs that is already up to temparture. BTW, That Seaco pot is ser. No. 018 stamped on the nomanclature plate. Nearly as old as Me !
My bit of trivia for the Day.
Cheers

Good Shooting

Lindy